Part needed for a Singer 21w180

[stitchbystitch]

Hi I need what I think is called the saddle hook for a singer 21w180

I need the bobbin case, hook and fulcrum. Does anyone have an idea for a source for this machine?

I am in Dutchess County NY 

[shoepatcher]

 The saddle is a cast piece.  Not going to be easy to find.  Do you know if Consew or anybody copied the machine? Parts list part number is #203504.

Need to see if any company copied it.

glenn

Edited February 21, 2023 by shoepatcher
grammar

[Constabulary]

do you need just the hook or the hook + hook saddle? If just the hook I probably have an idea but you have to remove the hook from the saddle first so that I can see the bottom side.

[Quade]

Is it really bad?  I'm wondering if a good cleaning and rust removal could restore most of it. 

https://www.amazon.com/Evapo-Rust-Original-Water-based-Non-Toxic-Biodegradable/dp/B00GRSOJSS/

I've used this. Does a fantastic job. The rust just dissolves away. 

Cast iron is pretty tough.  I'd probably get it apart, clean and inspect to see if you really need parts. 

[shoepatcher]

Lower back part of saddle looks like a part is broke off.

glenn

[DonInReno]

I don’t know anything about this model, but I did see a questionable cross reference on the hook with a number of Consew and singer machines.

Do you have the broken pieces?

[stitchbystitch]

yes i have the broken pieces it also looks like a part called a fulcrum I found for a pfaff 545 but its in Poland might have to go that route tho

I got the rest of the machine loose just this part is stuck 

[shoepatcher]

Fulcrum will do you no good  unless you can get the saddle fixed where it is broken.  That is what you screw the adjustment screw in for the fulcrum.

glenn