Thescandall Report post Posted February 25, 2023 I need a light gray stain for veg tanned. I’m making a Damascus skinner and want to match the steel look in the leather sheath I think vinigroon would work but I don’t want it black what ya got Quote Share this post Link to post Share on other sites
TomE Report post Posted February 25, 2023 https://campbell-randall.com/product/fcf-317-fenice-colorfast-leather-dye-317-metallic-pearl-1-liter-1 Quote Share this post Link to post Share on other sites
Ed in Tx Report post Posted February 26, 2023 Ditto on the Campbell Randall as the source. Actually I believe they have a grey color made by the same company Fenice. It is by far the best water based dye I have used. They also sell a reducer that is made specifically for the Fenice line of products. Quote Share this post Link to post Share on other sites
Simplejack1985 Report post Posted February 26, 2023 I took black and reduced it to grey for a carving I did with airborne wings. Not sure if this helps or not Quote Share this post Link to post Share on other sites
Thescandall Report post Posted February 26, 2023 I’m going to try the Campbell- Randall to see. The blade is almost done and it’s definitely gray after the acid dip. Quote Share this post Link to post Share on other sites
Handstitched Report post Posted February 28, 2023 Another idea, mix a little black dye into some white leather paint, just experiment with it until you get the colour you want. HS Quote Share this post Link to post Share on other sites
