Second set of rolled handles ever done. Tote Bag Repairs

[YinTx]

So, had a request to replace the "leather" pieces off of a tote bag.  As you can see, they were not really all leather, more like plastic coated split sections, with broken filler in the handle.  So I cobbled up some replacement parts, and did a set of rolled handles.  Not the best, but only the second set of rolled handles I have ever done.  Think if I have to do another set, I have ideas for improvement, but should be functional for this purpose!

 

 

[kgg]

Looks good.

kgg

[AlZilla]

Yeah, rolled handles are on my short-list wanna do, too. Those worked out nicely

But ... umm ... I'm a little shocked that you appear to have a "Hello Kitty" stamp in your arsenal. 

[Fraulein]

Turned out great! Always wanted to try rolled handles but haven't got around to it yet. 

  On 6/19/2023 at 8:34 PM, AlZilla said:

Yeah, rolled handles are on my short-list wanna do, too. Those worked out nicely

But ... umm ... I'm a little shocked that you appear to have a "Hello Kitty" stamp in your arsenal. 

Expand  

Agree about the hello kitty stamp lol 

[YinTx]

  On 6/19/2023 at 8:13 PM, kgg said:

Looks good.

kgg

Expand  

Appreciate it!

  On 6/19/2023 at 8:34 PM, AlZilla said:

Yeah, rolled handles are on my short-list wanna do, too. Those worked out nicely

But ... umm ... I'm a little shocked that you appear to have a "Hello Kitty" stamp in your arsenal. 

Expand  

Thanks!... and uhm, yah. you saw that. lol.  Had to get one special made just for this.  Might not ever use it again, don't know tho!

  On 6/19/2023 at 8:57 PM, Fraulein said:

Turned out great! Always wanted to try rolled handles but haven't got around to it yet. 

  On 6/19/2023 at 8:34 PM, AlZilla said:

Expand  

Thank you much.  They are a bit of a challenge with some idiosyncrasies, I think after a couple it is easier.  for sure the second handle was easier and came out better than the first.  Still left a lot of room for improvement.

[TomE]

The handles look very nice. I use Stohlman’s method for handle #17 in Case Making v. 2 for a rolled throatlatch on horse halters. Might be too stiff for a bag. 

[SeaCitadel]

Very nice.  Now the handles will outlast the bag in stead of the other way around.

[YinTx]

  On 6/19/2023 at 10:32 PM, TomE said:

The handles look very nice. I use Stohlman’s method for handle #17 in Case Making v. 2 for a rolled throatlatch on horse halters. Might be too stiff for a bag. 

Expand  

I have that book, I'll check out the technique.  I think I referenced that book for the first set of handles I made, might be the same.  For some reason my vol. 2 is not hanging out with vol's 1 and 3 right now...

  On 6/20/2023 at 12:48 AM, SeaCitadel said:

Very nice.  Now the handles will outlast the bag in stead of the other way around.

Expand  

Heh, yea thats probable!  At least I hope they do!

[TomE]

  On 6/20/2023 at 2:47 AM, YinTx said:

I have that book, I'll check out the technique.  I think I referenced that book for the first set of handles I made, might be the same.  For some reason my vol. 2 is not hanging out with vol's 1 and 3 right now...

Expand  

I posted a writeup on halter making in the saddles and tack accessories forum.

[AndrewWR]

Very neat work. I always look at the stitching first and yours is worth looking at. What core material did you use?

[MarshalWill]

Those are some very nice handles. That really looks great.

In applications where that type of handle can be rigid, I like to bury the stitching completely. It makes for a more comfortable handle. I wet the seam then mold the leather both ways over the stitch line with a hammer. The photos were taken after that tote had been used for over 10 years.

Edited July 27, 2023 by MarshalWill