Contributing Member fredk Posted May 4, 2024 Contributing Member Report Posted May 4, 2024 Might. But I'll stick with the vaseline on these. They had about a week for the vase to 'soak' in. Next time I'll put them straight out Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 4, 2024 Author Members Report Posted May 4, 2024 Okay. Quote Learning is a life-long journey.
Contributing Member fredk Posted May 13, 2024 Contributing Member Report Posted May 13, 2024 Its been raining today. Not very heavy. I put vaseline on the pieces again and put them out One piece after about 1 hour. Seems the rain is soaking in at the edges. The water is being repelled on the surface Another piece after 1 1/2 hours. The rain has soaked in but its also being repelled on the surface On its own and in one coat its not good at waterproofing but I think multiple coats, each allowed to soak in and be absorbed before the next coat is put on may be a decent waterproofer I don't think I have anything to try out my thoughts. It would need a leather hat or a shoulder bag and I don't have anything like that made Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 13, 2024 Author Members Report Posted May 13, 2024 I'll maybe make a small coin purse with veg tan ad try Vaseline on that. Let's see. Quote Learning is a life-long journey.
Contributing Member fredk Posted May 13, 2024 Contributing Member Report Posted May 13, 2024 Excellento Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 27, 2024 Author Members Report Posted May 27, 2024 (edited) I kept several pieces of veg-tanned leather with petroleum jelly , which I shall now call PJ, in the rain. These results are after a night long, heavy exposure. It rained heavily overnight and I could check the leathers only in the morning..: I used 6 pieces of leather as follows: Petroleum Jelly Mineral oil Control. N/A N/A CM N/A Yes PJ1 Yes No PJ2 Yes No PJM1 Yes Yes PJM2 Yes Yes Observations and conclusions follow. Edited May 27, 2024 by SUP Quote Learning is a life-long journey.
Contributing Member fredk Posted May 27, 2024 Contributing Member Report Posted May 27, 2024 PJM1 is looking promising What oil? Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 27, 2024 Author Members Report Posted May 27, 2024 OBSERVATIONS: FRONT BACK EDGE CONTROL S, WD0, TN; FD S,TN, FD S CM S, WD0, TS, FD S, TS, FD S PJ1 S-, WD, TN, FDRY S0, TN. FDRY S50, TN, FDRY PJ2 S-, WD, TN, FDRY S0, TN, FDRY S50, TN, FDRY PJM1 S, WD+, TS, FD+ S, TS, FD+ S PJM2 S, WD+, TS,FD+ S, TS,FD+ S The key: Soaking: S = heavily soaked. SL= lightly soaked S- = surface water absorption S0 = no water absorption. S50= half absorption Water droplets WD=water drops present WD0= no droplets WD+ = Many water droplets Feel of leather: FD = damp FDRY = dry Texture: TN Normal TS = soft Control: Soaked through no water drops on surface, not softened. Sides clearly soaked through as is the back. Control plus mineral oil: Darkened due to the oil, no water drops on surface, soaked through, sides and back are soaked as well. Noticeably softer. PJ1: Darkened due to PJ, Water drops on surface, surface water absorption, sides show water absorption on surface, back dry, texture unchanged. PJ2: Darkened due to PJ, Water drops on surface, surface water absorption, sides show water absorption on surface, back dry, texture unchanged. PJM1: Darkened due to PJ and MO, plenty of water drops on surface, complete water absorption, sides show complete water absorption, back show water absorption, texture soft, leather feels damp. PJM2: As for PJM1. CONCLUSIONS: It is clear that PJ does inhibit water absorption by leather, this inhibition being affected by other factors. Here, the mineral oil clearly decreased this water repellent effect. Petroleum Jelly is not absorbed by the leather. It remained on the surface. When applied on plain clean leather, it stays in place and is an effective repellent. When applied on top of mineral oil however, the 2 greasy materials slide against each other and the petroleum jelly being on the surface, probably did not spread well and possibly got drained away by heavy water drops and left the leather vulnerable. With a night of being exposed to heavy rain, the leather pieces with only PJ are still not soaked through. For short exposures, petroleum jelly appears to be a good water repellent. When and with what to use it and how to ensure it remains in place are the next questions. I will next try to see if warming the leather after petroleum jelly application helps. Unfortunately, although PJM1 and PJM2 both had plenty of water drops on the surface, they absorbed a lot of water as well. Need to see how to avoid that, other than not leave the leather out in torrential rain all night! Quote Learning is a life-long journey.
Contributing Member fredk Posted May 27, 2024 Contributing Member Report Posted May 27, 2024 Your PJ is different to my vaseline. The leather absorbed the vaseline I'll do some more tests later Quote Al speling misteaks aer all mi own werk..
Members SUP Posted May 27, 2024 Author Members Report Posted May 27, 2024 I'll go get the Vaseline brand of PJ and see what happens. Quote Learning is a life-long journey.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.