Members Constabulary Posted March 15, 2024 Members Report Posted March 15, 2024 last thing I could imagine is that the adjuster for the thread take up lever it too far in and is causing a bind. See page 11 in the manual. But I only can guess - hard to tell what is going on when not in front of your machine. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members TomHu Posted March 15, 2024 Author Members Report Posted March 15, 2024 Please see this link to the issue Looked into all of those things and called the company. The tech said the hand wheel is off its groove. I now need to figure out how to get it back on groove. @Garyak @Constabulary @DieselTech @Northmount Quote
Members Constabulary Posted March 16, 2024 Members Report Posted March 16, 2024 when he said the hand wheel is "off the grove" I would assume the knob (plunger thumb nut) on the hand wheel is not engaged. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members TomHu Posted March 18, 2024 Author Members Report Posted March 18, 2024 On 3/16/2024 at 2:33 AM, Constabulary said: when he said the hand wheel is "off the grove" I would assume the knob (plunger thumb nut) on the hand wheel is not engaged. Correct. For an update, I was able to get it back in line and we’re back up and running. Thanks for all of the advice. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.