Jump to content
okiwen

Sandal mid and strap opinions

Recommended Posts

I was wondering from all you sandal professionals,

do you line the leather straps with a nylon or webbing to increase strength?  Similar with the midsole. Would a nylon canvas provide durability for thinner soles? Neoprene or sheet cork?  I saw a video suggesting a wooden tongue depressor for a shank to provide rigidity. Would you?  

I am very open to what makes handmade sandals well worth the making.  Other above-average things to add to a design.

Thank you all.

Share this post


Link to post
Share on other sites

First . . . I am not a sandal person . . . but I can be talked into something similar so to speak.

PERSONAL OPINION:  I will NOT buy a product like that with a stiff sole.  The idea of them (for me) is comfortable . . . 

My favorite pair of footgear in the whole house is a pair of wool lined . . . suede . . . moccasins . . . and they have the very same leather on top as on the sole.

OTOH . . . as I am sometimes an actor portraying a Roman Centurion from the days of Jesus . . . I wear a similar piece of footwear called a Caligae . . . which is a sandal made of three pieces of leather.

The first is a piece of serious cowhide or horse hide or buffalo hide . . . it is the sole . . . maybe 14 or 16 oz if you can get it.  The middle part  (for the ones I make) are sewn to the sole . . . with the sole being heavily gouged for the stitches around the edge. 

This middle piece forms the pieces which go up around the foot . . . holding it on to the foot.  The third piece is simply an inner sole . . . cut to fit inside the middle piece . . . it is the piece of leather on which the foot rests.

There are no heels on this footwear . . . flat soles . . . no arch support . . . nothing but leather and the stitching.

And yes . . . they are very comfortable.

Spend an hour or so on youtube . . . use Caligae as your search word.  They often show the sole part as being several layers of leather . . . this accomodates the hob nails they used.  You don't want the hob nails . . . just one or at the most two layers for the soles.

May God bless,

Dwight

Share this post


Link to post
Share on other sites

@Dwight  Thank you for the reply, Dwight. 

 

Share this post


Link to post
Share on other sites

I made some sandals recently with 9 oz. shoulder as the sole. For casual use, that’s fine, esp if one glues a piece of rubber to the bottom. Don’t bother with a shank or stacking more layers than necessary. All that will do is make it hard, inflexible, and uncomfortable. Shanks are there for shoes with a separate heel where the sole drops to the toe, like in a dress shoe or cowboy boot. I guess some high-heeled “sandals” may have a shank, but it wouldn’t be straight like a popsicle stick anyway. 
 

Get that basic pattern, and then the world is your oyster as far as design goes. A good pattern to start with, if you don’t have one already, is the Dieselpunk.ro pattern. 

Share this post


Link to post
Share on other sites

Ive used the  sandalmaking workshop book its got a lot of nice basic patterns and info on materials and is pretty cheap. I also have tim Skyrm’s sandal book from Sorrell notions and findinds. It seems more advanced but i havent read it in depth yet

Share this post


Link to post
Share on other sites

rmdorman, Mablung, Thank you.

Share this post


Link to post
Share on other sites

You can check out my thread on making a 4-sole custom sandal. It's a monastic sandal, designed for wearing with socks (no flesh showing). I don't recommend this particular monastic design because without a strap between the two big toes, it doesn't keep the foot centered on the sandal. However the 4-sole design is excellent. I used 8 ounce shoulder for the top and I recommend 6.5 ounce veg tan for mid and bottom soles, the three of them glues and stitched. I remove sections of the midsole to create open channels for straps that cross over. I glue (and nail if necessary) gum rubber bottom, 1/8" thick (I forget the iron rating).

There are many designs for custom sandals that keep the foot centered on the sandal. I had about a dozen designs when I made sandals in my shop back in the '70's. I had forgotten that without a strap between those toes, the foot wanders on the topsole. (I had a stroke that wiped out my memory functions.)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...