okiwen Report post Posted August 5 I was wondering from all you sandal professionals, do you line the leather straps with a nylon or webbing to increase strength? Similar with the midsole. Would a nylon canvas provide durability for thinner soles? Neoprene or sheet cork? I saw a video suggesting a wooden tongue depressor for a shank to provide rigidity. Would you? I am very open to what makes handmade sandals well worth the making. Other above-average things to add to a design. Thank you all. Quote Share this post Link to post Share on other sites
Dwight Report post Posted August 5 First . . . I am not a sandal person . . . but I can be talked into something similar so to speak. PERSONAL OPINION: I will NOT buy a product like that with a stiff sole. The idea of them (for me) is comfortable . . . My favorite pair of footgear in the whole house is a pair of wool lined . . . suede . . . moccasins . . . and they have the very same leather on top as on the sole. OTOH . . . as I am sometimes an actor portraying a Roman Centurion from the days of Jesus . . . I wear a similar piece of footwear called a Caligae . . . which is a sandal made of three pieces of leather. The first is a piece of serious cowhide or horse hide or buffalo hide . . . it is the sole . . . maybe 14 or 16 oz if you can get it. The middle part (for the ones I make) are sewn to the sole . . . with the sole being heavily gouged for the stitches around the edge. This middle piece forms the pieces which go up around the foot . . . holding it on to the foot. The third piece is simply an inner sole . . . cut to fit inside the middle piece . . . it is the piece of leather on which the foot rests. There are no heels on this footwear . . . flat soles . . . no arch support . . . nothing but leather and the stitching. And yes . . . they are very comfortable. Spend an hour or so on youtube . . . use Caligae as your search word. They often show the sole part as being several layers of leather . . . this accomodates the hob nails they used. You don't want the hob nails . . . just one or at the most two layers for the soles. May God bless, Dwight Quote Share this post Link to post Share on other sites
okiwen Report post Posted August 5 @Dwight Thank you for the reply, Dwight. Quote Share this post Link to post Share on other sites
Mablung Report post Posted August 5 I made some sandals recently with 9 oz. shoulder as the sole. For casual use, that’s fine, esp if one glues a piece of rubber to the bottom. Don’t bother with a shank or stacking more layers than necessary. All that will do is make it hard, inflexible, and uncomfortable. Shanks are there for shoes with a separate heel where the sole drops to the toe, like in a dress shoe or cowboy boot. I guess some high-heeled “sandals” may have a shank, but it wouldn’t be straight like a popsicle stick anyway. Get that basic pattern, and then the world is your oyster as far as design goes. A good pattern to start with, if you don’t have one already, is the Dieselpunk.ro pattern. Quote Share this post Link to post Share on other sites
rmdorman Report post Posted yesterday at 04:47 AM Ive used the sandalmaking workshop book its got a lot of nice basic patterns and info on materials and is pretty cheap. I also have tim Skyrm’s sandal book from Sorrell notions and findinds. It seems more advanced but i havent read it in depth yet Quote Share this post Link to post Share on other sites