pengkegu Report post Posted October 17 Recently, I received a shoulder bag from a customer, and the hardware had fallen off, so they asked me to repair it for them. The customer requested that the repair be seamless, so I first removed the edge paint from the bag and then took out the stitching, but I didn’t cut it because I would need to sew it back later. After removing the edge paint, I could see that the screws inside had come loose, so I tightened them and applied some screw glue to prevent them from falling off again. The following steps are to reattach, paint the edges, and restitch. Quote Share this post Link to post Share on other sites
Brokenolmarine Report post Posted October 17 Looks very nice, I'm sure they are pleased. Quote Share this post Link to post Share on other sites
DieselTech Report post Posted October 17 Nice job on the repair. Can I ask? What edge paint are you using? & did you smooth it out using heat? Thanks. Quote Share this post Link to post Share on other sites
JDFred Report post Posted October 17 Well done Quote Share this post Link to post Share on other sites
pengkegu Report post Posted October 18 18 小时前，DieselTech 说： 修复得不错。我可以问一下吗？你用的是什么边缘涂料？你用热把它弄平了吗？ 谢谢。 你好。通常我不会使用加热方法来平滑边缘涂料。首先，我使用此工具涂抹一层，然后涂抹与颜色匹配的边缘涂料。 Quote Share this post Link to post Share on other sites
DieselTech Report post Posted October 18 1 minute ago, pengkegu said: 你好。通常我不会使用加热方法来平滑边缘涂料。首先，我使用此工具涂抹一层，然后涂抹与颜色匹配的边缘涂料。 Thanks. I will check it out. Quote Share this post Link to post Share on other sites
