Jump to content
Oldskiboat

Smooth the finished side of a new Portfolio

Recommended Posts

I have a new portfolio that has a rough feeling finished (hair side) surface.  It had a waxey feeling surface, still rough though, I cleaned it with Leatherique two part rejvenator and pristine clean.  Still the same feeling.  I brushed it with horse hair brushes.  Still a rough feeling.  Is there something I can do to make this a smooth feeling surface?   Thank you for your help with this.  Regards,  Gary Huber

IMG_20241218_103159437d.jpg

Share this post


Link to post
Share on other sites

You had a new portfolio. You may have ruined it, sorry, but you should always ask first. I think now the bigger problem is fixing your mistakes. It appears you have taken off some dye and possibly scuffed up the leather itself. 

Share this post


Link to post
Share on other sites

It was made that way, most likely.  It could be the nature of the beast from which the leather was made.  I have some Crazy Horse buffalo, which has a fairly coarse touch even though it is full of wax and/or oils.  It wears beautifully with lots of changing character but it sure ain't slick and smooth.

Not all leathers are meant to be smooth and polished.  When you buy a finished product, that's the finish you get... usually.

Share this post


Link to post
Share on other sites

Actually that is the way it looked before I used leatherique on it.

Share this post


Link to post
Share on other sites
9 hours ago, Oldskiboat said:

Actually that is the way it looked before I used leatherique on it.

OMG, really? Well, I would look into maybe shoe polish and check out videos on reconditioning and polishing leather shoes and the process. Good luck to you!!!!

Share this post


Link to post
Share on other sites

Glycerine saddle soap , canvas and a fair amount of elbow grease  !

Share this post


Link to post
Share on other sites

What is the canvas used for?

Share this post


Link to post
Share on other sites
8 minutes ago, Oldskiboat said:

What is the canvas used for?

Canvas works good for slicking leather.

Share this post


Link to post
Share on other sites
1 hour ago, Oldskiboat said:

What is the canvas used for?

What  DieselTech  said .

 

Take a scrap piece of leather and lightly moisten with water , then rub the glycerine  on , now rub with canvas . The longer you rub the smoother it gets ;) 

See if this is what you are after .

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...