Members Beehive Posted 5 hours ago Members Report Posted 5 hours ago (edited) Round edgers, creaser and stitch groover. The edgers and creaser were recycled spring steel from a vintage couch. Tempered. The best metal I could find at the time of having zero money. The groover is drill stock. I made these in 2006. I've since updated to Ron's tools. But to tell the truth, I still reach for these. They give the Ron's a run for the money. The creaser is still in use. The groover is retired. <a href="https://imageresizer.com/" target="_blank">Image Resizer</a> Edited 4 hours ago by Beehive Quote
Members DieselTech Posted 4 hours ago Members Report Posted 4 hours ago Nice fabrication work. They look like quality to me. What is the handles made of? Looks like a couple different woods. Quote
Members Beehive Posted 4 hours ago Author Members Report Posted 4 hours ago (edited) The handles are short legs for something(Ash?). Bought at Lowe's. The big end was put towards the blades because of the hole the mounting screw was in. The spring steel was flat stock. I'd date the couch to the 50's or 60's. It had real cotton padding. Red oak for wood. But it was worn out and tossed. That's when I stripped it of every piece of metal. The blades are held in with two part epoxy. I don't remember the brand of glue but it's still going solid. Edited 4 hours ago by Beehive Quote
Members Beehive Posted 4 hours ago Author Members Report Posted 4 hours ago (edited) Closer Pic of the ends. Lot's of dremel work. I have no idea when, "Round edgers" first came out but I was making and using them before I knew you could buy them. Edited 4 hours ago by Beehive Quote
Members Beehive Posted 4 hours ago Author Members Report Posted 4 hours ago (edited) My stitch hammer for pounding a stitch line. I can't remember what kind of hammer it was but it had the face I needed. Polished and cold blue. Shingle hammer? (It wasn't a body hammer). Edited 4 hours ago by Beehive Quote
CFM chuck123wapati Posted 4 hours ago CFM Report Posted 4 hours ago sweet !! making your tools is half the fun. Quote
Members Beehive Posted 4 hours ago Author Members Report Posted 4 hours ago (edited) The only store bought tool I used was the needles that come in the handy stitcher. The awl with a bobbin in the handle. I never used it like it was. The needle was stuck in a drill press. Stitching wheel to mark the holes and a 12" drill press to push the needle through. I stitched leather, using a drill press, for decades. Up until I bought pricking irons. Edited 4 hours ago by Beehive Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.