How do I keep the edges of my projects looking natural with top dyed leather

[SR71]

Hi there,

I'm trying to find a very consistent method of keeping the edges of my dyed projects natural without the top dye showing through on the edge. I have done it properly (See the leather project at the bottom of the pic) but to do this I need very specific edge beveler that becomes dull quick and is so tricky to sharpen that I cannot use it. I'm wondering if theres any tips to make this process less of a hassle and much more consistent with any edge beveler.

Many thanks!

 

 

[Beehive]

I'm not sure exactly what you're asking. Dying the skin side with bleed not showing on the edges?

 

 

 

[SR71]

Yes! for example I have dyed this leather green but notice how on the top project you can see the green streaks. I would like to know a reliable and consistent way to keep these streak to a minimum, similar to the bottom project.
 

I could just through dye the leather, making the leather edges green too but I personally don’t like the way this looks.

[chuck123wapati]

skive it off a bit.

 

[fredk]

Cut your leather oversize, dye and assemble  then cut through the layers with a knife to get the project size

Wet your leather, as if casing it, apply the dye diluted 1:1. Put on multiple coats until you get the depth of colour you like. This will eliminate the streaks

[TomE]

Dye the pieces of leather then cut them to size to create a fresh edge, or buy drum dyed leather for these projects.

[Northmount]

On 2/21/2025 at 7:14 AM, SR71 said:

I'm trying to find a very consistent method of keeping the edges of my dyed projects natural

Moved your post to Dyes, Antiques, Stains, Glues, Waxes, Finishes and Conditioners.