Members Basically Bob Posted March 1 Members Report Posted March 1 (edited) .. probably the most complex project I have done. The concept was taken from a case featured in one of Al Stohlman’s books. (My sweetie did the needlework) Edited March 1 by Basically Bob Added to original post Quote
Members Beehive Posted March 1 Members Report Posted March 1 That's incredibly nice! I bet that took you awhile. Quote
AlZilla Posted March 1 Report Posted March 1 That is a really nice and well crafted item. Very inspiring. Quote
Members MarshalWill Posted March 1 Members Report Posted March 1 A big thumbs-up for this! Very nice work. Quote
Members Sheilajeanne Posted March 2 Members Report Posted March 2 Lovely! That's some pretty complicated stitching - tight corners. Curious to know jow much of it is machine stitching vs. hand? Quote
Members Basically Bob Posted March 4 Author Members Report Posted March 4 (edited) Thanks everyone. I appreciate your kind comments :). Sheilajeanne, it is all hand stitched. I used left and right pricking irons. The edges of the sides are mitred to approximately 22.5 degrees. I used a French edger for the mitered edge. Edited March 4 by Basically Bob Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.