Members Timmmm Posted Saturday at 01:55 PM Members Report Posted Saturday at 01:55 PM I have two 5-6 ounce leather straps Ive cut. I’m going to tool one side. Do I glue everything first and then tool or should I tool the single 5-6 ounce and then glue and sew? Thanks Quote
FrankHester Posted Saturday at 02:02 PM Report Posted Saturday at 02:02 PM I would tool and then glue after it dries out good. Quote
Members Dwight Posted Saturday at 08:37 PM Members Report Posted Saturday at 08:37 PM There are very few times when it is optimal to tool later . . . as a rule . . . stamp it and tool it first. May God bless, Dwight Quote
Members dikman Posted Saturday at 09:43 PM Members Report Posted Saturday at 09:43 PM If you glue it and then tool it you could end up with some unwanted marks on the other side. Quote
Members Timmmm Posted Saturday at 10:45 PM Author Members Report Posted Saturday at 10:45 PM Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.