Members Timmmm Posted March 22 Members Report Posted March 22 I have two 5-6 ounce leather straps Ive cut. I’m going to tool one side. Do I glue everything first and then tool or should I tool the single 5-6 ounce and then glue and sew? Thanks Quote
FrankHester Posted March 22 Report Posted March 22 I would tool and then glue after it dries out good. Quote
Members Dwight Posted March 22 Members Report Posted March 22 There are very few times when it is optimal to tool later . . . as a rule . . . stamp it and tool it first. May God bless, Dwight Quote If you can breathe, . . . thank God. If you can read, . . . thank a teacher. If you are reading this in English, . . . thank a veteran. www.dwightsgunleather.com
Members dikman Posted March 22 Members Report Posted March 22 If you glue it and then tool it you could end up with some unwanted marks on the other side. Quote Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500. Chinese shoe patcher; Singer 201K (old hand crank)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.