Members RVacc Posted June 25 Members Report Posted June 25 Hello, I have been looking around and have found that you can get parts to convert your walking foot machine to a roller feed. We currently run consew 255rb-2/3, 287rb-2, and 285rb-2. My issue is i havent been able to locate where i can get the parts for conversion or a decent walkthrough for converting the machine itself. From my understanding you replace the walking pressure foot, remove walking foot, replace needle plate and feed dog. Is there any other adjustments that need to be done to the machine when converting? Can anyone point me in the right direction? Thanks You! Quote
Northmount Posted June 25 Report Posted June 25 45 minutes ago, RVacc said: Can anyone point me in the right direction? Moved to leather sewing machines. You'll get more help here. Quote
Members RVacc Posted June 25 Author Members Report Posted June 25 30 minutes ago, Northmount said: Moved to leather sewing machines. You'll get more help here. Thank You, i must have missed the thread when i was posting. Quote
Members nylonRigging Posted June 27 Members Report Posted June 27 LWcom link to older thread / similar discussion . - https://leatherworker.net/forum/topic/95016-roller-foot-could-you-and-would-you/ - Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.