kgg Posted yesterday at 12:33 AM Author Report Posted yesterday at 12:33 AM (edited) 13 minutes ago, Scoutmom said: could you put a link to the three way outlet splitter ($10 CAD)? It appears the price went up from the $9.99 CAD when I ordered it to $10.69 https://www.amazon.ca/Airbrush-Splitter-Disconnect-Regulation-Compressor/dp/B09XDYFG93/ref=sr_1_1?crid=3Q6F555AR3IIX&dib=eyJ2IjoiMSJ9.wE4XqJHbKH9dn79iiZk-EH1t-_Jmt1oZ7neTJr9ZKPxohuZnpVvwpU1yIvUXgiwOzoTAebFLHjntt9ZW0wvYsVeALoPaLkJPHr2218LLQuSBgPGUvBEporcPt_4adYb7yizB6HVkyOu5hy1C7qAQZIAyuzV8xGNNiZUlYiL_lE_tzm58kUgZYrBseG8m_Oy8BtJrtV5_dM_4h7ZvHL_g_V9xVBNCaGzdkGUX-Pz5328KvUKLdM22rGWoJyq4BTIypNIs3C3KPV4BOEbcOmVCsqA89TlC0sSNQ5n5DptkaqY.UTa_EHjXPEQqqPzvA02-2XfKfSD_5cp3R5p6ffLqCmA&dib_tag=se&keywords=Tiiyee+Metal+Air+Hose+Splitter%2C+3-Way+Cross+Lever%2C+Quick-Connect%2C+Silver%2C+6.3+mm+%2F+0.25+inch%2C+Airbrush+Adapter&qid=1758242082&sprefix=tiiyee+metal+air+hose+splitter%2C+3-way+cross+lever%2C+quick-connect%2C+silver%2C+6+3+mm+%2F+0+25+inch%2C+airbrush+adapter+%2Caps%2C206&sr=8-1 kgg Edited yesterday at 12:36 AM by kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
kgg Posted yesterday at 12:41 AM Author Report Posted yesterday at 12:41 AM 18 minutes ago, Scoutmom said: Love the 3D printed holders Thank you. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
CdK Posted yesterday at 02:59 AM Report Posted yesterday at 02:59 AM (edited) Nice setup. I use a DA Paasche for airbrush work with dyes and I have found that using denatured alky instead of isopropyl alky for dilution gave me better penetration and finish on vegtan. The main reason for using an airbrush is gradient coloring/shading and the sunburst finish on small items is striking. I'm unsure how this will work on shoes or other previously treated leather. Similar to you I apply a single coat of NFO minimum of 24hrs to vegtan before applying Fiebings Pro Dye cut to about 50/50 with alky. Absorption and even spread is quite good. As tests I did sectional cuts of 8~10oz HO and found I got better dye penetration on NFO treated than without. Having spraying chamber or doing this outdoors and using a good respirator is important. Edited yesterday at 03:01 AM by CdK Duplication Quote Leather work machines I own: Thor 1341, Thor 441, LSZ-1 clone, 801 bell skiver, Tinker's Delight Shoe Patcher. (Tippmann Boss was re-homed.)
Members Scoutmom Posted yesterday at 09:37 AM Members Report Posted yesterday at 09:37 AM Thank you for the link. Helped me find it in Amazon for the US. Quote
kgg Posted yesterday at 10:37 AM Author Report Posted yesterday at 10:37 AM 7 hours ago, CdK said: Having spraying chamber or doing this outdoors and using a good respirator is important. Totally Agree. The next project is going to be a small spray enclosure with exhaust for the house. 1 hour ago, Scoutmom said: Thank you for the link. Glad it helped kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.