Die bending jig v2

[dikman]

I made another die bending jig. I had the idea to make one with a simpler linkage so just had to do it. Unfortunately while the linkage looks simpler it took a bit of messing around to get it to work, and the angle of the handle is too high which meant I had to put a hefty downward bend in it to get it to a comfortable height. I might re-make the handle linkage as my original idea seems to work better. The other difference is the push slide, the original square tube sliding in a square tube has a bit of slop in it, the rod version is quite a snug fit, but it meant attaching the fittings to it was more complicated. I now know how to make an even better one - but I won't as it will require too much machining and there's nothing to be gained.

[kgg]

33 minutes ago, dikman said:

I made another die bending jig.

Nicely done. I do like the rod drive verses the square tube drive. I am going to assume you made the base larger on the new one as you had the metal hanging around.

kgg

[dikman]

Yep, I didn't have any more of the smaller channel iron, this one was about the same length (so I didn't have to cut it) but is considerably heavier (it's been sitting in my forge for years!).

I sat down for some time staring at the handle/pivot area and came to the conclusion that the design isn't very efficient when it comes to applying force and transferring it to the slide. So I'm redoing it similar to the original, shouldn't be too difficult, just some more cutting/drilling/welding.

Hey kgg, don't you ever sleep?

[chuck123wapati]

cooool i,m droolin , I love makin tools!!!!

[dikman]

 Yep, I don't need another one but over the years I've realised I'm happiest when I'm making something. I forgot to mention that another improvement is the knob on the left, it's so I can clamp the lefthand tool to stop it moving around.

Edited 5 hours ago by dikman