Pedersen 308 / Junker & Ruh SD 28 leather machine needle alignment

[Einherj]

I bought this Pedersen 308 (identical to Junker & Ruh SD 28) leather stitching machine, but there is an issue:

The needle hits somehow too far back, it hits the foot and the edge of the needle plate.
I was thinking the needle has bent too much somehow, so I tried with 3 different needles, same issue.
The plate has some damage, so it seems like the previous owner has had the same problem.
I can't see a way to adjust the needle position forward. It would need to shift about 5 millimeters to not hit anything and clear the bobbin case too.

Any ideas?

[Mulesaw]

My best suggestion is that the needles are wrong.

There have been an international shortage of the correct needles for those machines, and my guess is that the previous owner tried to buy and use some non original needles from another outsole stitcher. 

Where are you located in the world? perhaps some member near you have an original needle that you could try.

 

I recently bought a small pack of needles from @Jennihaemae 

 

They are cheap and the correct needles. 

I think that her post got moved to "sold" due to the date (the posts will automatically be moved there after a certain time)
You could try to send her a message.

Brgds Jonas 

[Tastech]

@Einherj. The needle has no adjustment apart from the stitch length . Where the needle is fixed is solid and cant move therefore i conclude you have the wrong needle . The current wear marks could be as a result of deflection of the needle when re -stitching through existing holes like when doing a repair . However don't sweat it because new needles are available from here . https://www.leffler.com.au/pederson-needle-hvy-for-308-machine/   .  This is the only source i know of . They are in Australia and they are reasonably priced . Become a member for a good discount .  The needles are quite tough and last a while but i don't know for how much longer they will exist so get a few as spares . I occasionally sharpen mine with a small hand held diamond file . If stitching sole leather wet the leather beforehand. 

[kgg]

6 hours ago, Tastech said:

However don't sweat it because new needles are available from here . https://www.leffler.com.au/pederson-needle-hvy-for-308-machine/   .  This is the only source i know of . They are in Australia and they are reasonably priced .

I guess "reasonably priced" is a relative thing. Each needle at $28.57 AUD ($26.23 CAD) and I thought paying $4.50 CAD for 794S size 250 was expensive.   

kgg

[Constabulary]

Way cool machine- really! I owned one but it did not suit my needs. I would not buy one again. Why - because why in the world should I pay $25-30 or one (1) needle? Chances are high that you break one and you better have a few spares on hand. Know what I mean? Depending on what you want to sew I would look for a an other model.