Members Randy Cornelius Posted February 4, 2009 Members Report Posted February 4, 2009 The bounce and the double impressions is most likely caused by the surface that you are using. If the table underneather that you are beating on has some bounce that is what is causeing the double impressions. I always use my makers stamp over the heavy 4x4 leg on my cuting table that goes down to the concrete floor. That way there is s solid surface underneath that will keep the surface from bouncing. I also have a heavy 1' steel plate that I put under the leather before using my large (2" oval) makers stamp. Just a suggestion. Randy Quote Randy Cornelius Cornelius Saddlery LaCygne, Kansas Randy & Riley Cornelius Ride Hard, Shoot Fast and Always Tell the Truth...
Members carver Posted February 4, 2009 Members Report Posted February 4, 2009 Awhile back some one posted that they were starting a makers stamp collection. Well I now have one of my own. I ordered it from "Grey Ghost Graphics" out of Myrtel Beach SC. I ordered it on Friday and got it today, Saturday. It works great. It cost $55.00 plus $10.00 for shipping. I got the 1" one.Tom Carr could I get some contact info on Grey Ghost Graphics thanks Carver Quote
carr52 Posted February 4, 2009 Author Report Posted February 4, 2009 Carr could I get some contact info on Grey Ghost Graphics thanks Carver Sure can Carver www.greyghostgrapics.com Phone Number (842)-903-4788 or you can use thier tool free number Toll Free (866)-205-9810 Quote
AndyL1 Posted February 4, 2009 Report Posted February 4, 2009 (edited) Sure can Carverwww.greyghostgrapics.com Phone Number (842)-903-4788 or you can use thier tool free number Toll Free (866)-205-9810 that's http://greyghostgraphics.com/ (forgot the H in graphics at the end) Edited February 4, 2009 by AndyL1 Quote Blackthorn Leather on Etsy • Blackthorn Leather on Facebook
carr52 Posted February 5, 2009 Author Report Posted February 5, 2009 that's http://greyghostgraphics.com/ (forgot the H in graphics at the end) OOPS, sorry about that. My bad. I think my fingers got ahead of my brain. Tom Quote
Members Jim L. Posted February 8, 2009 Members Report Posted February 8, 2009 OOPS, sorry about that. My bad. I think my fingers got ahead of my brain.Tom Hi, I use several of these, use a steel hammer and a light tap, just once. It works just fine for me. JL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.