Jump to content

Recommended Posts

  • Moderator
Posted

I generally only buy 1" or 3/4", you set the burr on them then nip them off to 1/8", then peen them over.

Art

Is that the same as a smidgeon? So then , is it SOP to nip them off to get them just right?
Posted
I generally only buy 1" or 3/4", you set the burr on them then nip them off to 1/8", then peen them over.

Art

i've allways gone with an eighth,when setting ,i also used a steel anvil and [forgive me]a ball pein hammer and kinda pat pat patted a pretty dome over th washer peining i guess .i bought a rivet setter in oz in68 and have wore it down to 1 inch 3 times hitting steel on steel

but i felt i got the best dome that way n stayed with it pete

  • Members
Posted

OK guys, that's what I needed to know. Gonna order some 3/4" #14s from Weaver. So, I'll nip off about 1/8". Is that practical, or should I just order 1" rivets?

  • Members
Posted

I'd say get 1", you can always cut them back but it's hard to add length if you need it :) and the price is usually quite similar.

  • Moderator
Posted

And don't nip any off until you set the burr washer, the ends are tapered so the washer goes on easily. Get the 1" for your app.

Art

OK guys, that's what I needed to know. Gonna order some 3/4" #14s from Weaver. So, I'll nip off about 1/8". Is that practical, or should I just order 1" rivets?
  • Members
Posted
OK guys, that's what I needed to know. Gonna order some 3/4" #14s from Weaver. So, I'll nip off about 1/8". Is that practical, or should I just order 1" rivets?

Order a #14 size rivet setter too !

  • Members
Posted

OK gents, thanks again. So, what's the procedure? The washer slips over the rivet, then needs to be "set". How do you set it? Then you nip and peen (pien?) over the rivet. Then round off the dome. Which part does a setting tool do?

Sorry for the dumb questions, but I'm in the dark...moving forward, but groping.

Doug

Posted

Here are some peening instructions

http://www.forth-armoury.com/research/peen...een_a_rivet.htm

http://www.cowboyway.com/HowTo/BlevinsBuckles4.htm

It isn't hard to do. Get good nippers because it can be difficult to nip the rivet.

:red_bandana::red_bandana::red_bandana:

  • Members
Posted

Oh, yeah! You have all been so patient and helpful. I feel like I'm ready to put some rubber on the road! I'll post some updates when I have something to show.

Daggrim

Posted
Oh, yeah! You have all been so patient and helpful. I feel like I'm ready to put some rubber on the road! I'll post some updates when I have something to show.

Daggrim

just a li'l sidebar ol chap,get a folgers coffee can,size [big]n throw yer snips of copper in th can,it'll help when you retire by then it'll be full and you can sell to scrap dealers.believe it or no i've filled three,got good return also pete
Posted

Bruce I’m interested in the Douglas set you mentioned. Where might I find one to purchase?

Oh, and I like your anvil…I’ve been using an NC shoeing anvil for over 26 years.

Bree thank you for the instruction links. My son is starting to make his own armor and he’ll enjoy looking at the forth armory site…too bad they’re out of business now

ken

  • Moderator
Posted

Ken,

I like the NC too. Easy to handle, heavy enough to do the job. I guess these guys like the new aluminum base anvils, but I expect this one will outlive me. You can get the rivet sets directly from Bob Douglas (307-737-2222) or from his daughter Vandy at Sheridan Leather Outfitters (307-834-8279). You can buy the three piece set, or the head domer individually.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...