Members Talfuchre Posted March 26, 2009 Author Members Report Posted March 26, 2009 I am not sure why you said that Rayban. Here is the link to the Boatswain Whistle Knot: http://www.ropeworks.biz/reader/boatswai.pdf TF Quote
Members Echo4V Posted March 26, 2009 Members Report Posted March 26, 2009 Talfuchre- glad you found the site. Just wanted to post on here to give my opinion on the grommet. I think for your purpose I would leave the grommet off. Either way it's one heck of a first project. David Quote
TomSwede Posted March 26, 2009 Report Posted March 26, 2009 Good looking sheath and sweet stitching. I like it better with the grommet. Tom Quote Confucius - Better a diamond with a flaw than a pebble without. --------------------------------------------- www.1eye1.se blogg.1eye1.se
Members Saddlebag Posted March 26, 2009 Members Report Posted March 26, 2009 Very nice work. A fellow who's lived in the bush all his life, hunting, trapping, etc. told me that one doesn't want anything shiney as it can reflect in the sun. When I make knife cases I run a thin strip of leather about 1/4" wide along the stitched edge. This protects the stitching from the sharp blade as it's slid in and out of the sheath. Quote
DaveD Posted March 27, 2009 Report Posted March 27, 2009 Rayban: Here's a great animated site for learning different knots. http://www.animatedknots.com/monkeysfist/i...imatedknots.com Dave I meant to ask, did you do the monkey fist on the lanyard? I want to learn that. Quote
Members Rayban Posted March 27, 2009 Members Report Posted March 27, 2009 Rayban: Here's a great animated site for learning different knots. http://www.animatedknots.com/monkeysfist/i...imatedknots.com Dave Thanks Dave...very cool site, I'll be using it for sure! Quote Raybanwww.rgleather.net
rhall Posted March 27, 2009 Report Posted March 27, 2009 Great work and a tip..Prior to staining ,wipe the project down with Denatured Alcohol ,that way your stain will "set" a lot easier.It works for me!It also saves on materials(stain). Quote
Members Talfuchre Posted March 28, 2009 Author Members Report Posted March 28, 2009 Great work and a tip..Prior to staining ,wipe the project down with Denatured Alcohol ,that way your stain will "set" a lot easier.It works for me!It also saves on materials(stain). Nice - thanks for the advice - this is exactly the kind of stuff I need to hear. LIttle stuff that makes my work better! TF Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.