Jump to content

Recommended Posts

  • Members
Posted

I saw an earlier post that says to lay a finish before using saddle soap. I've been trying to burnish with saddle soap on glazed leather, so it's already finished, and it still ends up staining any time it gets past the edge. Anything I can do to combat this?

use fiebings deglazer before you dye or burnish the leather. It's cheap and is also great for cleaning up your brushes and drips and spills from your dye. It also will clean most smudges from your leather and make it accept the dye more uniformly. Don't smoke when using it kinda stinky but goes away fairly fast.

  • Replies 280
  • Created
  • Last Reply

Top Posters In This Topic

Posted (edited)

use fiebings deglazer before you dye or burnish the leather. It's cheap and is also great for cleaning up your brushes and drips and spills from your dye. It also will clean most smudges from your leather and make it accept the dye more uniformly. Don't smoke when using it kinda stinky but goes away fairly fast.

rawr66

When you say you're using glazed leather, I assume you are talking about a chrome tanned product. If that's true, you won't be able to get a nice burnish. Chrome tanned leather won't hold a burnish. Hope this helps.....

Bobby

Edited by hidepounder
Leqatherworkerthumbnail2La.jpg LongLiveCowboys-1.jpgWFDPhoto2a.jpg

  • 3 weeks later...
  • 2 weeks later...
  • Members
Posted

Complete Noob here. Just got into this leather working stuff since I didn't want to spend $100 for a knife sheath that I wanted to buy and figured I could make it myself. Well........as everyone knows, I am now completely addicted.

I won't show my knife sheath as it was my first project (and I think it looks like at leat a $50 sheath), but I have been trying to figure out my issues (too many to list), and edging is a big one.

Thank you Bob for your explanations. Great responses from everyone as well.

I tried your canvas suggestion for burnishing and holy crapola is that the way to go. I have no machinery to attach to except a Dremel to sand with, and I have been hand burnishing my items and it is all the difference in the world. And I don't even know if I'm using the right kind of canvas as I am using the only thing available.........old painters tarps.

Now, at this point in my leather working experience (only about 1 week now), my "projects" are simply just making drink coasters. Easy to cut, nothing to stitch, and even the ugly ones work in the end............so at least I can put my junk projects to some type of work.

But, as I was working on some samples I realized some streaking after using Resolene. Besides going lighter on the next coaster, how can I remove the streaks after I my first rookie coat? And is the removal method best for a polishing of this too after a second coat?

(And for Bob.......how do you get any projects done with all of the information you post on here.....and I'm sure you're swamped with PMs and emails............quite amazing).

Jellyroll

  • 2 weeks later...
Posted

Hello Bob,

Just had to say that I enjoyed the excellent video on burnishing and wanted to say thank you for providing information about the Quik-Slik as offered by Sheridan Leather. It is a superb product and works like a charm. I had a few rough edged items in the shop and experimented with burnishing using the product and was amazed. Almost made the edges look like a pro did the work. lol

I thought, initially, that it was a bit expensive but when I learned how little I had to use during my trials, it is, indeed, a real bargain. I would recommend this product to anyone that wanted an excellent product that would assist with achievement of a finely burnished edge.

Also, I used a motorized burnisher, the one offered by Steve of Cobra Fame, and it is also a very welcome addition to my workspace.

Thank you, again.

God Bless.

Ray

  • 1 month later...
  • Members
Posted

This reminded me…remember when the circular, "donut" shaped hand slickers were made of Lignum Vitae? Before they switched to plastic. I still have a couple of those and while I usually use my Lignum burnisher mounted in my lathe chuck, those old circular hand burnishers can be very handy for some projects.

Scott

At the very least, use a cocbolo hand slicker.

Hope this helps.....

Bobby

  • 1 month later...
  • Members
Posted

Hi Bob,

Just wanted to thank you for your tutorial. Now that I have finally been able to track down the glycerine soap, my burnishing has definitely improved and the amount of time spent trying to get those perfect edges has decreased. Using a refillable marker full of dye has also made my edge dying look 100% professional, and reduced a mess on my fingers.

My only question is what can be used to toughen up the burnish when we are say making bags that get bumped around etc. I have used both resolene, beeswax and tan kote but if the edges of a flap on a messenger bag get rubbed from a shoulder strap, I have found that the burnish tends to go "fuzzy" in a very short time. I have not seen neat lac here in Canada so have not had the opportunity to try it. Perhaps one of the Tandy sheens which are acrylic based may work?

Anyones thoughts would be appreciated.

Tim

  • 1 month later...
  • Members
Posted

Boy Howdy, Thank you!

I'm making 9 knife sheaths right now. I used your technique. I've got repetitive strain things in my hand, so my partner made be a burnisher by wrapping a 3/8" dowel with denim so I could chuck it into a drill on low speed. I don't have glycerine soap: I've been burnishing with water then saddle soap. I did a finish pass with a piece of caribou antler, then edge-dyed a couple of the belt loop straps and top edges of the sheath, waxed and buffed them. (Those parts are hard to do after the sheath's done.) I've never done anything that looked that good. Thank you.

  • 2 months later...
  • Members
Posted

Great tutorial, thank you for taking the time to do this. Have a question for everybody. When using thin leather, 2/3oz for things like card pockets for wallets how do you do it?

I'm able to get a decent edge in the leather but it's so flimsy and soft that it just mushrooms the edge and by the time I'm done with all my steps it just doesn't look good. It's so thin it feels impossible to hold it without it just flopping around. I've tried sandwiching the leather between two rulers but still less then desirable results. Any advice or edges just better left unfinished for wallet pockets?

Guest
This topic is now closed to further replies.

×
×
  • Create New...