MarkB Posted January 23, 2010 Report Posted January 23, 2010 Here is the latest pair they are out of HO 10oz lined with 3oz. Icarved the brand on them and border stamp them with a Carlos border. Thanks for looking Mark Quote
Members steveh Posted January 23, 2010 Members Report Posted January 23, 2010 Very nice refined professional work. Quote
Members Doug Mclean Posted January 23, 2010 Members Report Posted January 23, 2010 Nice clean work Mark. I like the makers stamp. I'm always trying different ways to dress up the border. Looks good. DMcLean Quote
Members dustin29 Posted January 23, 2010 Members Report Posted January 23, 2010 As usual your work looks great. Nice job Mark! Quote
TomSwede Posted January 24, 2010 Report Posted January 24, 2010 Looking really great!! Taht border is well planned and meet perfectly in corners!! Clean and pro looking!! Tom Quote
MarkB Posted January 25, 2010 Author Report Posted January 25, 2010 Thank you all. I like that border a lot. That was a Berry King stamp, it's the smallest he had in stock at the time and it was just right for these. Mark Quote
hidepounder Posted January 25, 2010 Report Posted January 25, 2010 They look real good Mark! Your workmanship is really neat and clean! The tiny meandering border is terrific! Quote
Ambassador pete Posted January 25, 2010 Ambassador Report Posted January 25, 2010 Mark- Beautiful work! Question though Did you cut or click the straps before tooling? I ask because I wanted to know how you got the "channel" widths parallel and even with the stitch groove. What I mean is, did you cut it out, lay in the stitch groove and use IT as a reference to mark the parallel channel for the border stamp? thanks and once again REALLY NICE WORK respectfully pete Quote
MarkB Posted January 25, 2010 Author Report Posted January 25, 2010 Mark- Beautiful work! Question though Did you cut or click the straps before tooling? I ask because I wanted to know how you got the "channel" widths parallel and even with the stitch groove. What I mean is, did you cut it out, lay in the stitch groove and use IT as a reference to mark the parallel channel for the border stamp? thanks and once again REALLY NICE WORK respectfully pete Pete I case them, cut out to size, then put in the stitch grove, then use a set of dividers to lay out the cut lines for the border and then bevel and stamp. Hope that helps. Mark Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.