Members Boothill Bob Posted February 24, 2010 Members Report Posted February 24, 2010 I need a makerstamp, its hard to get it in sweden and the shipping from the states is expensive, Is there someone out there that can help me?? The one on the pic is nice Best regards//Boothill Bob Quote
Ambassador pete Posted February 24, 2010 Ambassador Report Posted February 24, 2010 I need a makerstamp, its hard to get it in sweden and the shipping from the states is expensive, Is there someone out there that can help me?? The one on the pic is nice Best regards//Boothill Bob Hi and welcome! there are a few stamp vendors right here on the forum! Just contact them through this site and they will be able to give you an estimate. Start with Grey Ghost. pete Quote
Members Tina Posted February 24, 2010 Members Report Posted February 24, 2010 I need a makerstamp, its hard to get it in sweden and the shipping from the states is expensive, Is there someone out there that can help me?? The one on the pic is nice Best regards//Boothill Bob Hej Bob, Jag har skaffat min i metall från denna sida och är supernöjd med service och resultat: (Har inte hört om någon "maker" i Europa hitintills) http://www.phillipsengraving.com/Leather_Stamps.html Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
King's X Posted February 24, 2010 Report Posted February 24, 2010 Ms. Brenda at www.lasergiftcreations.com. She is a member here and has a lot of satisfied customers on here and over the pond. Good luck. Quote Greetings from Central Texas! The Grain Side Up blog #TheGrainSideUp
Members Boothill Bob Posted February 25, 2010 Author Members Report Posted February 25, 2010 Tanx all for your answers, I´m gona look in to the sites and order one.. Best Regards//Boothill Bob Hej Bob, Jag har skaffat min i metall från denna sida och är supernöjd med service och resultat: (Har inte hört om någon "maker" i Europa hitintills) http://www.phillipse...her_Stamps.html Hej.. Vad fick du betala för den med frakt och allt? Quote
Members Tina Posted February 25, 2010 Members Report Posted February 25, 2010 Tanx all for your answers, I´m gona look in to the sites and order one.. Best Regards//Boothill Bob Hej.. Vad fick du betala för den med frakt och allt? Lite fusk, vi bodde i USA tills i höstas så jag köpte den innan vi kom över hit till Sverige igen... Skriv en rad och fråga, han var mycket enkel att ha att göra med. Med "First-Class Mail® International Package" (USPS=Amerikanska posten), ca $10 till Sverige enligt postens hemsida (www.usps.com) Lycka till:-) Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Members bex DK Posted February 26, 2010 Members Report Posted February 26, 2010 Just got ours from Brenda at Laser gifts. Her shipping to Denmark was under $14 for TWO. We got a larger one with logo, name, and DENMARK on it and a small one with only logo. Really nice work. So even with the dollar going up, the rates are quite reasonable. Of course we had to pay Danish tax and a customs fee for importing, but even with that it seems quite fairly priced. We had asked at the local leather shop... she said the US was the only option for getting something... Quote
Members Boothill Bob Posted February 26, 2010 Author Members Report Posted February 26, 2010 Just got ours from Brenda at Laser gifts. Her shipping to Denmark was under $14 for TWO. We got a larger one with logo, name, and DENMARK on it and a small one with only logo. Really nice work. So even with the dollar going up, the rates are quite reasonable. Of course we had to pay Danish tax and a customs fee for importing, but even with that it seems quite fairly priced. We had asked at the local leather shop... she said the US was the only option for getting something... Do u have an adress?? www. .... .. ;-) Quote
King's X Posted February 27, 2010 Report Posted February 27, 2010 www.lasergiftcreations.com Quote Greetings from Central Texas! The Grain Side Up blog #TheGrainSideUp
Trox Posted February 27, 2010 Report Posted February 27, 2010 Hej Bob, Jag har skaffat min i metall från denna sida och är supernöjd med service och resultat: (Har inte hört om någon "maker" i Europa hitintills) http://www.phillipse...her_Stamps.html Hei Tina! Jeg har også tenkt til å kjøpe en Maker stamp fra Phillips Engraving og har fått tilsendt layouten på pdf i email. Men jeg ble usikker når den eneste muligheten for betaling var med Visa kort på telefon. Jeg bor i Oslo Norge og har aldri brukt Visa kortet mitt på telefonen til utlandet før. Det er et betalings kort og ikke et kreditt kort, derfor er jeg ikke forsikret mot phising/svindel. Derfor har jeg ikke handlet med dem. Men hvis du kan gå god for at det er et bra firma? Da føler jeg meg sikkrere. på forhånd takk! MVH! Trox Quote Tor Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100
Trox Posted February 27, 2010 Report Posted February 27, 2010 I need a makerstamp, its hard to get it in sweden and the shipping from the states is expensive, Is there someone out there that can help me?? The one on the pic is nice Best regards//Boothill Bob Hei Bob! Jeg har jeg hadde som jeg skrev til Tina kontakt med phillips Engraving og fått et tilbud fra dem på 2 stk 3D stamp (samme som typen som selges hos Leather shops verden rundt, 3D stempler som du sikker har mange av) med denne layouten (se filen) for 35 USD pr. stk. plus shipping. Shipping innen USA var ca 10 USD men til Norge har jeg ikke fått vite ennå. De bruker UPS. Jeg sende en makin del på 150 gram med post express til Texas fra Oslo og det kom på 150 NOK. Og tok 4 dager. Derfor kan det vel ikke bli så mye dyrere med UPS? men jeg vet ikke. Hvis Tina går god for dem, som hun jo gjør har jeg tenkt å kjøpe fra dem. MVH! TroxTOR ROUGSETH STAMPS (1).pdf TOR ROUGSETH STAMPS (1).pdf Quote Tor Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100
Members Boothill Bob Posted February 28, 2010 Author Members Report Posted February 28, 2010 Hei Bob! Jeg har jeg hadde som jeg skrev til Tina kontakt med phillips Engraving og fått et tilbud fra dem på 2 stk 3D stamp (samme som typen som selges hos Leather shops verden rundt, 3D stempler som du sikker har mange av) med denne layouten (se filen) for 35 USD pr. stk. plus shipping. Shipping innen USA var ca 10 USD men til Norge har jeg ikke fått vite ennå. De bruker UPS. Jeg sende en makin del på 150 gram med post express til Texas fra Oslo og det kom på 150 NOK. Og tok 4 dager. Derfor kan det vel ikke bli så mye dyrere med UPS? men jeg vet ikke. Hvis Tina går god for dem, som hun jo gjør har jeg tenkt å kjøpe fra dem. MVH! TroxTOR ROUGSETH STAMPS (1).pdf Hej Trox. Det är en liknande stämpel som jag är ute efter också, dom var inte så dyra.. Men som du säger så känns det inte riktigt rätt att betala med kortet över telefonen . Men jag vill ju ha en så att jag kan märka mina alster... Quote
Members Tina Posted February 28, 2010 Members Report Posted February 28, 2010 Hej Trox oxh Bob (Trox...jag missade din fråga häromdagen, såg den inte förräns nu) Jag kan bara säga att jag själv använde kortet över telefonen (Visa) möjligen är dom så små att dom inte har tillgång till säkerhetsprylen online? För mig fungerade det alldeles utmärkt. UPS är mycket dyrare i frakt, försök få honom att använda USPS (posten) I USA är det mycket vanligare att använda kortet för köp via internet till höger och vänster, jag har nog blivit lite Amerikaniserad där och min oro är inte så stor längre. Klart är att man ska använda sitt sunda förnuft:-) Jag fick oxo layouten skickad som PDF och jag gjorde lite ändringar som han fixade till. I mitt tycke var firman mer än helt OK. Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Members Boothill Bob Posted February 28, 2010 Author Members Report Posted February 28, 2010 Hej Trox oxh Bob (Trox...jag missade din fråga häromdagen, såg den inte förräns nu) Jag kan bara säga att jag själv använde kortet över telefonen (Visa) möjligen är dom så små att dom inte har tillgång till säkerhetsprylen online? För mig fungerade det alldeles utmärkt. UPS är mycket dyrare i frakt, försök få honom att använda USPS (posten) I USA är det mycket vanligare att använda kortet för köp via internet till höger och vänster, jag har nog blivit lite Amerikaniserad där och min oro är inte så stor längre. Klart är att man ska använda sitt sunda förnuft:-) Jag fick oxo layouten skickad som PDF och jag gjorde lite ändringar som han fixade till. I mitt tycke var firman mer än helt OK. Hej Tina.. Då blir det nog att jag beställer därifrån. Det är ju bra att man får layouten före så att man får se hur det blir. Jag tackar sååå mycket för hjälpen.. //Boothill Bob Quote
Members Ken Nelson Posted March 1, 2010 Members Report Posted March 1, 2010 Hej Tina.. Då blir det nog att jag beställer därifrån. Det är ju bra att man får layouten före så att man får se hur det blir. Jag tackar sååå mycket för hjälpen.. //Boothill Bob I have had makers stamps by several makers and all of them have done a pretty good job but the best one I have had was an infinity like the one pictured. It will last if lifetime if used correctly. I am currently using 2 from Steel Stamps INC. but had a problem with one of them and there are posts on this site concerning that. Stamp good but the handle is not good on one and the owner of the company did not treat me well at all. Nasty Man in my opinion! Hope this helps. Ken Quote
Members Boothill Bob Posted August 27, 2010 Author Members Report Posted August 27, 2010 Now finally I´ve got my makerstamp. Here's mine ... got it from Phillips Engraving:whatdoyouthink: Now finally I´ve got my makerstamp. Here's mine ... got it from Phillips Engraving:whatdoyouthink: Hmmm. Something was missing...... Quote
Members Tina Posted August 27, 2010 Members Report Posted August 27, 2010 Now finally I´ve got my makerstamp. Here's mine ... got it from Phillips Engraving:whatdoyouthink: Hmmm. Something was missing...... Looking good... I hope you're going to have use for it now for many years to come:thumbsup: Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.