Lizard Inlay Knife Sheath

[MADMAX22]

Well just finished one of a couple of sheaths I am working on for a buddy.

This is HO leather, the black is vinegaroon, inlay is olive green lizard. Oiled, sno-seal, then a couple light coats of neat-lac.

The top portion with the inlay is two layers of 5oz, the welt (think its called that lol) is 5oz as well, the back with the belt loop is 8oz doubled over. Alot of leather for this one. To make it a little easier to punch thru the leather with my awl and because the one awl that I have that is the correct sized width wise is not long enough to effectively punch thru all that leather I assembled the inlay portion and the welt and punched my holes, then assembled the complete sheath and repunched the holes. I had to go back thru the back side just to ensure the holes were wide enough on the reverse side. Kind of a pain in the butt however it helped alot with the final stitching.

Thread is 6 cord linen dyed black.

Enjoy, any constructive criticism welcome.

Edited April 4, 2010 by MADMAX22

[Luke Hatley]

A fine looking sheath.........your Buddy should be very pleased.

[MADMAX22]

Thanks Luke, yeah he should be.

[DCKNIVES]

Looks good brother.Dave

[dirtclod]

Nice real nice !!

[leatheroo]

beautiful work....soooooo well finished....i cant imagine trying to use an awl and then sewing something this thick....love the inlay

[MADMAX22]

Thanks for the compliments guys and gals.

Yeah Leatheroo I dont know how the saddle makers who sew by hand to it. Its a challenge for me on just this little stuff.

[chestercheeto]

Really nice colour!

[katsass]

Really nice colour!

Great looking work.....I'm partial to really well done inlay work. Mike

[MADMAX22]

Katsass I cant remember but where do you post your work at? I know alot of the stuff you do is really good but dont recall where you like to show it off at and would like to take a look again.