Members 276ccm Posted April 26, 2008 Members Report Posted April 26, 2008 Hi there :-) from Oslo, Norway Got my first piece of leather and a couple of tools two days ago.. wanting to learn :-) I´m usually working woth airbrush, pinstriping and goldleaf and thought shaping leather could be a new passion in the line.. :-) Here is my first atempt Quote Blog: http://276ccm.blogspot.com/ Facebook: https://www.facebook.com/276ccm
Contributing Member Regis Posted April 26, 2008 Contributing Member Report Posted April 26, 2008 First off, welcome 276ccm. You're off to a great start. Quote God, Family, and Country (although liberals are attempting to destroy these in the USA)
Ambassador leatheroo Posted April 26, 2008 Ambassador Report Posted April 26, 2008 Welcome 276, hope to see more of your work soon Quote "]http://leatheroo.blogspot
TomSwede Posted April 27, 2008 Report Posted April 27, 2008 Morr'n da'! Welcome to LW! Nice stuff, is that pushed from the backside? Tom Quote Confucius - Better a diamond with a flaw than a pebble without. --------------------------------------------- www.1eye1.se blogg.1eye1.se
Contributing Member TwinOaks Posted April 27, 2008 Contributing Member Report Posted April 27, 2008 Howdy and welcome to LW! Nice work, very clean lines. Hope to see more soon. Mike Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
Members 276ccm Posted April 27, 2008 Author Members Report Posted April 27, 2008 Thanks all :-) I`m looking forwared to get a little thicker leather to test. Yea Tom, It´s pressed down from the back and then pressed down at the front on the oposit parts.. I`m not sure what I`m doing.. or what technique which is right and so on.. just testing and failing :-) I guess I should read a little to see how it should be done :-) Quote Blog: http://276ccm.blogspot.com/ Facebook: https://www.facebook.com/276ccm
Members TroyS Posted April 27, 2008 Members Report Posted April 27, 2008 Welcome to the group! Nice looking work! Right, wrong or indifferent, it looks cool! Troy Quote Troy
TomSwede Posted April 27, 2008 Report Posted April 27, 2008 It looks really cool and I can't imagine what yo can come up with this. Will be interesting to see. If you shred leather very fine and mix with glue you get what I think is called leather putty wich you can fill the hollow outs in the back to keep it from collapsing over time. Also check out ClayB's stuff on extreme embossing. Tom Quote Confucius - Better a diamond with a flaw than a pebble without. --------------------------------------------- www.1eye1.se blogg.1eye1.se
Members tonyc1 Posted April 27, 2008 Members Report Posted April 27, 2008 Hi there :-) from Oslo, NorwayGot my first piece of leather and a couple of tools two days ago.. wanting to learn :-) I´m usually working woth airbrush, pinstriping and goldleaf and thought shaping leather could be a new passion in the line.. :-) Here is my first atempt What is it going to be? Tony. Quote
Members 276ccm Posted April 27, 2008 Author Members Report Posted April 27, 2008 What is it going to be?Tony. Not sure acually.. or nothing special I guess.. just a first try to see if I managed to do this.. :-) It´s just a test piece Quote Blog: http://276ccm.blogspot.com/ Facebook: https://www.facebook.com/276ccm
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.