C+R Ffl 03 Bound Book Cover Design Help

[johnggrg]

Ok not sure which area to post this hope this is ok. I want to make a book cover for my C+R FFL 03 bound book. The book is 8 3/16 wide x 3/4 thick x 10 1/4 high. I have never made a book cover before so this is a first.

I was wondering if some one could help me with a design for the cover or maybe someone has made one already? Maybe a pattern I could print out?

I would like the design to have C+R FFL 03 licence Bound book and then some type of picture? or something. Any help would be greatly appreciated. Thank you. John

[johnggrg]

Ok not sure which area to post this hope this is ok. I want to make a book cover for my C+R FFL 03 bound book. The book is 8 3/16 wide x 3/4 thick x 10 1/4 high. I have never made a book cover before so this is a first.

I was wondering if some one could help me with a design for the cover or maybe someone has made one already? Maybe a pattern I could print out?

I would like the design to have C+R FFL 03 licence Bound book and then some type of picture? or something. Any help would be greatly appreciated. Thank you. John

Ok had the cover measurement off it's a National Brand account book. It is 8 3/8 x 10 3/8.

Would anyone be willing to help me out here? All I need is someone who knows how to make a printable design to size. Curio and Relics in an arc. Then towards the bottom FFL 03. With 3/4 inch letters.

This is the patterns and templates area and no replies? If anyone can help me I would greatly appreciate it. John

[lwillingham]

Don't know if you've already finished this project or not. I did notice that the post is pretty old, but I plan to try this with a book that the binding has broken on (minus the cut corners).

http://www.instructables.com/id/Simple-Leather-Book-Binding-using-power-tools-BSG/

[Northmount]

Here is a link for instructions on bookbinding, especially for magazines. Bookbinding

It's a great way to protect your magazines.

CTG

Edited September 6, 2012 by northmount