Ferg Report post Posted February 8, 2011 I am not bashing Barry's knives in the slightest, simply need more than one source for an 1/8" bead blade, preferably fit a Tandy knife. ferg Quote Share this post Link to post Share on other sites
whinewine Report post Posted February 8, 2011 I am not bashing Barry's knives in the slightest, simply need more than one source for an 1/8" bead blade, preferably fit a Tandy knife. ferg Henley Quote Share this post Link to post Share on other sites
Ferg Report post Posted February 8, 2011 Henley I can't even get anything from their website. I see nothing to send an e-mail or a telephone number. If you have same thanks ferg Quote Share this post Link to post Share on other sites
whinewine Report post Posted February 8, 2011 I can't even get anything from their website. I see nothing to send an e-mail or a telephone number. If you have same thanks ferg Henley= gemosphere.tripod.com/GEMOSPHERE/swivel_knives.html or EXTREMEALL@aol.com or (318)631-3545 Louis or Tony Henley or (318)636-0262 fax # or write 422 Pro St., Shreveport, LA 71105 Beader blades available in 1/16, 3/32,1/8, 5/32 *** Btw, Website prices are outdated*** Quote Share this post Link to post Share on other sites
Ferg Report post Posted February 8, 2011 Henley= gemosphere.tripod.com/GEMOSPHERE/swivel_knives.html or EXTREMEALL@aol.com or (318)631-3545 Louis or Tony Henley or (318)636-0262 fax # or write 422 Pro St., Shreveport, LA 71105 Beader blades available in 1/16, 3/32,1/8, 5/32 *** Btw, Website prices are outdated*** whinewine, Their entire site is outdated What a jumble. I sent an e-mail with questions. Regards, ferg Quote Share this post Link to post Share on other sites
whinewine Report post Posted February 8, 2011 whinewine, Their entire site is outdated What a jumble. I sent an e-mail with questions. Regards, ferg Ferg: my suggestion would be to call. If the #'s been disconnected, then it might be a good indication that they may be out of business . A woman, Cathy Schlim (not a member here, I believe) helped a bunch of us get ours. I don't have her email anymore, but Gtwister (a member here) might have it. Send him a PM. russ Quote Share this post Link to post Share on other sites
gtwister09 Report post Posted February 8, 2011 Ferg, Sent you a PM. Hope that helps. Regards, Ben Quote Share this post Link to post Share on other sites
Ferg Report post Posted February 8, 2011 Ferg, Sent you a PM. Hope that helps. Regards, Ben Thanks Ben, I e-mailed Cathy. ferg Quote Share this post Link to post Share on other sites
Deb59 Report post Posted February 9, 2011 Sheridan Leather Outfitters carries beader blades that fit Tandy swivel knives. I purchased one when I was in Sheridan at the show this last spring. I use it in a Tandy knife. Seems like there are 4 or 5 different bead width's available, and they were pretty reasonable. I did not find a website for them but here is their phone # 307-674-6679. I think they are listed in the Leatherwork Directory on this site also. Hope this helps - Deb Quote Share this post Link to post Share on other sites
Billy P Report post Posted February 21, 2011 Ferg, I just talked to Mr. Louis Henley, at Henley Manu. in La. He said to call him, they do have the beader blades and he is really nice to talk to. Tell him Billy from South Carolina said to call. The #is 1(318)631-3545. I hope this helps Billy P Quote Share this post Link to post Share on other sites
tg lucas Report post Posted February 22, 2011 I am not bashing Barry's knives in the slightest, simply need more than one source for an 1/8" bead blade, preferably fit a Tandy knife. ferg hey Ferg, for those of us who dont know, namely me, what is a beading blade? never heard that term before Quote Share this post Link to post Share on other sites
Ferg Report post Posted February 22, 2011 Ferg, I just talked to Mr. Louis Henley, at Henley Manu. in La. He said to call him, they do have the beader blades and he is really nice to talk to. Tell him Billy from South Carolina said to call. The #is 1(318)631-3545. I hope this helps Billy P Billy, The person I communicated with said they were three months behind, I just didn't wish to wait that long. Thanks, ferg Quote Share this post Link to post Share on other sites
Ferg Report post Posted February 22, 2011 hey Ferg, for those of us who dont know, namely me, what is a beading blade? never heard that term before tg, In lieu of having one blade cutting with your swivel knife, the beader blades make two cuts side by side. They come in different widths. I believe 1/8" is the smallest width and up to at least 1/4". Check some of Bob Park's work. He uses the beader blades. ferg Quote Share this post Link to post Share on other sites
hidepounder Report post Posted February 22, 2011 tg, In lieu of having one blade cutting with your swivel knife, the beader blades make two cuts side by side. They come in different widths. I believe 1/8" is the smallest width and up to at least 1/4". Check some of Bob Park's work. He uses the beader blades. ferg Hi Ferg, Actually I do not use beader blades. I don't even own one, LOL! I've considered buying one but every time I try one I change my mind. I cut all my bead borders freehand or I use a push beader. The push beader is probably what you saw. Hope this helps...... Bobby Quote Share this post Link to post Share on other sites
Ken Nelson Report post Posted February 23, 2011 Hi Ferg, Actually I do not use beader blades. I don't even own one, LOL! I've considered buying one but every time I try one I change my mind. I cut all my bead borders freehand or I use a push beader. The push beader is probably what you saw. Hope this helps...... Bobby Would you recommend a push beader please? How do you sharpen your beader? Thank you. Ken Quote Share this post Link to post Share on other sites
mikesmith648 Report post Posted September 1, 2012 Barry King makes a beader blade that fits the Tandy knife ... Just saying! Quote Share this post Link to post Share on other sites
mikesmith648 Report post Posted September 1, 2012 Also if you get in contact with Luke at Sheridan Leather....He has the ones that Kluttz makes....they are good beading tools. Not sure who else makes a beading knife blade but I am she if you got in touch with Luke that he would know. Quote Share this post Link to post Share on other sites
gringobill Report post Posted September 2, 2012 Chuck Smith makes really good ones. Quote Share this post Link to post Share on other sites
