Jump to content

Recommended Posts

Posted

Just finished a wallet and was feeling rather pleased with myself. Then as I was applying leather balm on the exterior, I noticed 2 spots which wouldn't soak in the balm. Upon closer look, it looks like somehow, 2 drops of leather craft cement (the white very liquid type) has gotten onto it.

As I have success washing my cement brush simply by soaking it in water, I decided to wet a small cloth, apply a little white saddle soap and work that area.

Turns out, the spots not only remained, the area became burnished. I'm about to throw this wallet out of the window in frustration, it's probably a goner but just wanna try my luck and see if anything can be done to return it to its natural colour.

post-18459-020243900 1297567900_thumb.jp

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

I don't know how well this would work out or if you would like the effect, but what about applying some needsfoot oil to it? I know that it would darken it up but maybe it would help hide the spots.

Damon

  • Members
Posted

You can make it into a "distressed" leather item. I am kinda partial to the distressed look, myself. thumbsup.gif

Posted

Thanks guys, but I hate to try to cover things up when it is not the intended look. I don't know why, but such little things always seems to happen just when the wallet is completed, not during. I have threw away so many projects at the last stage due to these kind of things that I am starting to think maybe I should just throw away the hobby as well.

  • Members
Posted

In the immortal words of Bob Ross, it's a happy accident...give something new a try and make lemonade out of the lemons.

As other have mentioned, try distressed look or better yet, continue the technique and see if you can control the glue "masking" technique you have discovered.

No sense in tossing a perfectly functional project simply because the plan changed slightly...especially when more lessons are waiting to be learned from it.

Chris

Three Mutts Customs Leather - http://www.threemuttscustoms.com

Posted

You can always contact the manufacturer and ask them how to remove it.

  • Members
Posted

This is the reason I always clean my leather before even thinking about dying it. There are several commercial products out there that work fine. I find that using plain ole alcohol works most times. That is one fine looking wallet so it is now time for you to get creative. Instead of just a plain wallet make a work of art out of it. Some of my best looking work came after I made a mistake and had to get creative to cover up that mistake.

  • Members
Posted

hi great wallet

sorry don,t know how to help you

but the wallet looks great

do you have the patten for it ?

if so can you e mail

many thanks walletman

Just finished a wallet and was feeling rather pleased with myself. Then as I was applying leather balm on the exterior, I noticed 2 spots which wouldn't soak in the balm. Upon closer look, it looks like somehow, 2 drops of leather craft cement (the white very liquid type) has gotten onto it.

As I have success washing my cement brush simply by soaking it in water, I decided to wet a small cloth, apply a little white saddle soap and work that area.

Turns out, the spots not only remained, the area became burnished. I'm about to throw this wallet out of the window in frustration, it's probably a goner but just wanna try my luck and see if anything can be done to return it to its natural colour.

  • Contributing Member
Posted

Did you try Fiebings deglazer or any of their other solvents?

Worse case solution is to fill a small pan or bucket with Fiebings USMC Black and drop the whole thing into it and let the dye soak through. Now it is a black wallet rather than a brown. Once you buff the surfaces I don't think anyone but you will know what happened in that one spot.

I stopped using the white leather cement and went back to plain old rubber cement due to some of the problems you are having.

BillB

Bill B. Nead

Posted

Bill, I went from rubber cement to white because the rubber cement is tricky when trying to burnish edges. Just a little too much and it will show between the layers. I don't have the deglazer, but do intend to include it in my next order (will be some time till i finish up my current stash of veg tan).

First time I am using this and wasn't expecting it to be so liquid that it flowed over. I was trying to glue a lining on and needed the whole piece covered and thought it would be easier to just squeeze a bunch onto the piece directly and then spread. Bad move.

Anyway folks, thanks for all the reply. I've finally decided to just use it for myself :rolleyes:

Walletman - will revert

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...