Members Sanch Posted February 16, 2011 Members Report Posted February 16, 2011 I am trying to find out who makes the stamping tools that Springfield sells in their basic 9 set. I am getting ready to start putting together my kit and need a medium range priced set of stamps. I have read here (forum) that the craftool sets are decent but would like a little better than decent so I will not have to upgrade in quality to many times. I am a firm believer that a quality tool can make or break a job. Quote
Members HellfireJack Posted February 16, 2011 Members Report Posted February 16, 2011 If you mean these http://springfieldleather.com/store/product/22201/Stamping-Tool-Set%2CSLC-Basic-9/ then they're craftool. Quote
Moderator Art Posted February 16, 2011 Moderator Report Posted February 16, 2011 Basic 15 set in 1018 steel About $165 Gomph-Hackbarth Tools 10754 N. Martineau Rd Elfrida, AZ 85610 Phone: 520-642-3891 Fax: 520-642-3891 On 2/16/2011 at 4:00 PM, stealfdawg said: I am trying to find out who makes the stamping tools that Springfield sells in their basic 9 set. I am getting ready to start putting together my kit and need a medium range priced set of stamps. I have read here (forum) that the craftool sets are decent but would like a little better than decent so I will not have to upgrade in quality to many times. I am a firm believer that a quality tool can make or break a job. Quote
Members Sanch Posted February 16, 2011 Author Members Report Posted February 16, 2011 On 2/16/2011 at 5:20 PM, Art said: Basic 15 set in 1018 steel About $165 Gomph-Hackbarth Tools 10754 N. Martineau Rd Elfrida, AZ 85610 Phone: 520-642-3891 Fax: 520-642-3891 Ok I kinda figured! Hacbarth kinda pricey for now just trying to get decent bang for my dollar! Thank you kindly for the response! Quote
Members Randy Cornelius Posted February 16, 2011 Members Report Posted February 16, 2011 My suggestion is that you get what you pay for, I have seen some really good craft tools and then again some that are very poor. You have to really know what you are looking for when you buy one. Sometimes when they are stamping out tools the die they use gets worn out and they keep making them and the product gets very bad and there seems to be no quality control, they just sell them to some unsuspection sole who don't know the difference. My suggestion is to look at Bary King's tools, they are not cheep but I feel you get the best value for you dollar without breaking the bank. Just my .02 cents worth. Randhy Quote
Moderator Art Posted February 16, 2011 Moderator Report Posted February 16, 2011 Do the math, that's $11 each; kinda pricey? They are all needed tools, no dogs you will never use. Get a good swivel knife and some geometrics from Barry and you will be able to do a lot of work. Art On 2/16/2011 at 9:12 PM, stealfdawg said: Ok I kinda figured! Hacbarth kinda pricey for now just trying to get decent bang for my dollar! Thank you kindly for the response! Quote
Members Sanch Posted February 17, 2011 Author Members Report Posted February 17, 2011 On 2/16/2011 at 10:08 PM, Art said: Do the math, that's $11 each; kinda pricey? They are all needed tools, no dogs you will never use. Get a good swivel knife and some geometrics from Barry and you will be able to do a lot of work. Art rolmao!! yea i did the math and was like damn i spent way more on my air brushes when i started that artform! im going to contact them tomorrow and we'll see! ive sourced most of my "necessary stuff" but after this little thread i may just research more and more before i go jumpin out all heals thank you again for the pointer in the right common sense direction Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.