Members joshg Posted July 6, 2011 Members Report Posted July 6, 2011 Does anyone know where I can find a 3 inch conway buckle? Or something that will do the same type of thing? I have had a super hard time finding something that will do the job of a conway in 3inches. Any suggestions would be greatly appreciated. Thanks Quote
Moderator Art Posted July 6, 2011 Moderator Report Posted July 6, 2011 Hi Josh, I don't think anyone makes them as a standard item. You seldom see someone needing a 3 inch wide set of reins or hip drops or even pole tugs for that matter. I have seen 1 1/2 inch as about the biggest. Is it possible to split the 3 inch strap and use two 1 1/2 buckles? I don't know if that was a stupid question as I am not familiar with your application. If you are handy, you could braze two of them together, that would look nifty (did I just say nifty?). Art Does anyone know where I can find a 3 inch conway buckle? Or something that will do the same type of thing? I have had a super hard time finding something that will do the job of a conway in 3inches. Any suggestions would be greatly appreciated. Thanks Quote For heaven's sakes pilgrim, make yourself a strop!
KAYAK45 Posted July 7, 2011 Report Posted July 7, 2011 (edited) Art you have a great idea I think. But two bucklers side/side will rub or runover. How about three 1". The outer two standard length and the third ..say..11/2 " longer. The outsides wont touch each other, the third looks great and wont touch the other two. Just an idea, I also don't know the application you ask about. I did a weight lifter belt that way for looks and adjustability Edited July 7, 2011 by KAYAK45 Quote Once believed in GOD and the DOllAR...... Hello God!
Steve Brewer Posted July 7, 2011 Report Posted July 7, 2011 Art you have a great idea I think. But two bucklers side/side will rub or runover. How about three 1". The outer two standard length and the third ..say..11/2 " longer. The outsides wont touch each other, the third looks great and wont touch the other two. Just an idea, I also don't know the application you ask about. I did a weight lifter belt that way for looks and adjustability They use to make 3" conways for stirup leathers but the had two posts.Try MacPherson in LA Quote
Moderator Art Posted July 7, 2011 Moderator Report Posted July 7, 2011 As long as the holes are the same in each strap, you could stagger them. Or maybe tack weld (or braze) two of the Conways together so they would be one unit. Art Art you have a great idea I think. But two bucklers side/side will rub or runover. How about three 1". The outer two standard length and the third ..say..11/2 " longer. The outsides wont touch each other, the third looks great and wont touch the other two. Just an idea, I also don't know the application you ask about. I did a weight lifter belt that way for looks and adjustability Quote For heaven's sakes pilgrim, make yourself a strop!
Members lazyd Posted July 8, 2011 Members Report Posted July 8, 2011 If you get in a pinch, I have a pair of used 3" Conways. They have 3 posts. One of the outside posts is broke off. It's the only set I have ever seen in my shop, they must be pretty rare. I would sell or trade them for something I need. Good luck-----------------------Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.