gun belt and holster

[carr52]

First off my photography sucks. I've been working on this for some time now. I kept wandering off track. I still have to put a lining in it. Didnt do before cause I didnt think I wanted it. Live and learn.

Tom

[gunfighter48]

That's look great!!! Carving looks very good also. The only suggestion on future rigs is to round off the corner on the bottom left side of the holster. The square corner will get bent and damaged fairly quickly. Rounding that corner will make it blend in better and enhance the appearance. You'll also want to bevel the edges of the belt and holster, it will look better. You're doing great, just keep making them.

John

[Srigs]

Good looking rig and can't wait to see the finished product.

John is right beveling the edges will help it hold up much better. By the way, which gun is that made for?

[carr52]

Good looking rig and can't wait to see the finished product.

John is right beveling the edges will help it hold up much better. By the way, which gun is that made for?

I dont have the gun at the moment but it's made for a 22 magnum.

[$$hobby]

First off my photography sucks. I've been working on this for some time now. I kept wandering off track. I still have to put a lining in it. Didnt do before cause I didnt think I wanted it. Live and learn.

Tom

you could always go back and put some type of lining on both. even the holster. you would have to remove the stitching on the holster and add the lining. the only issue i could see is that the holster maybe too tight after the lining is added.