Members carljc72 Posted August 23, 2011 Members Report Posted August 23, 2011 Hi all, does anyone have templates or construction details for a cigar case. I would like to make one that is two peice and holds around 3 cigars. I have seen a couple but no details on how to make/fit/form. I have made a few holsters but this style of project is new to me. Thanks in advance for any help or suggestions. Carl Quote
Members Somawas Posted August 25, 2011 Members Report Posted August 25, 2011 Hi all, does anyone have templates or construction details for a cigar case. I would like to make one that is two peice and holds around 3 cigars. I have seen a couple but no details on how to make/fit/form. I have made a few holsters but this style of project is new to me. Thanks in advance for any help or suggestions. Carl There's a pattern in Vol 1. of Stohlamn's Mking Leather Cases. Quote
Members carljc72 Posted August 26, 2011 Author Members Report Posted August 26, 2011 There's a pattern in Vol 1. of Stohlamn's Mking Leather Cases. Thank you, I will have to try to find it. Carl Quote
Members Blake Posted August 26, 2011 Members Report Posted August 26, 2011 Thank you, I will have to try to find it. Carl There was also an article and patterns in an issue of the LCJ. You might check their data base Blake Quote
Members Leatherimages Posted August 27, 2011 Members Report Posted August 27, 2011 To separate individual compartments for cigars, you might try a U shaped yoke to create creased sections, and "clip" it over the case with dowels as fillers for the space. ie. You would need two U shaped "clips" to creat three compartments. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.