Members mattsh Posted November 1, 2011 Members Report Posted November 1, 2011 Here are a few that I finished recently. One for me, which was a test piece for the Glock 19 to get the stitching just right and as you can see I needed to move the corner of the trigger guard up about 1/4", which I did on the IWB with snaps that is pictured below. Sorry the picture is slightly out of focus. My phone camera didn't want to cooperate on this one. This is for a friend's brother-in-law. As I noted above I adjusted the stitching line and now its much better. This is for a friend at work. His pistol is actually a stainless Springfield. But boy I sure like how that blued customized Colt looks in there. Quote "Courage brother, do not stumble, though thy path be dark as night: There is a star to guide the humble, trust in God, and do the right. Let the road be dark and dreary and its end far out of sight. Face it bravely, strong or weary. Trust God, and do the right." - General Norman Schwarzkopf
Members Haystacker Posted November 2, 2011 Members Report Posted November 2, 2011 Wow! That wrong handed rig is a looker. Nice job. Quote haysholsters@hotmail.com NRA Life Member
Members mattsh Posted November 2, 2011 Author Members Report Posted November 2, 2011 Thanks Hays. It did turn out really nice, even though its for the wrong side. Quote "Courage brother, do not stumble, though thy path be dark as night: There is a star to guide the humble, trust in God, and do the right. Let the road be dark and dreary and its end far out of sight. Face it bravely, strong or weary. Trust God, and do the right." - General Norman Schwarzkopf
Members Josh Ashman Posted November 2, 2011 Members Report Posted November 2, 2011 All three look very nice, great job! Best regards, Josh Quote
Members husker Posted November 2, 2011 Members Report Posted November 2, 2011 That is some nice work. That bottom southpaw rig is nice looking. Quote
Members Eaglestroker Posted November 2, 2011 Members Report Posted November 2, 2011 I like your stitching on that belt a lot, what thread size is that? I'm curious what your lining it with as well. Nice work! Quote
Members mattsh Posted November 3, 2011 Author Members Report Posted November 3, 2011 Eaglestroker - I wish I could answer your questions with certainty, but I can't. I should have prefaced the picture with the statement that the belt was not made by me. It is a very nice belt, it was made by a man in Colorado. I was able to buy it cheaper than I could make one, so I did. The thread looks to be 207 or 138, hard to say since I have never seen those sizes, but I know it is smaller than 277. The lining would appear to be almost like a chrome tanned leather it is so soft, but like I said, not entirely sure. Sorry. Quote "Courage brother, do not stumble, though thy path be dark as night: There is a star to guide the humble, trust in God, and do the right. Let the road be dark and dreary and its end far out of sight. Face it bravely, strong or weary. Trust God, and do the right." - General Norman Schwarzkopf
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.