Jump to content

Recommended Posts

  • Members
Posted

Where can I find tiny leather tool stamps? I'm looking for small border stamps that could actually go around my makers stamp. Thanks for the help!

  • Ambassador
Posted

Have you looked at the Tandy Craft tools there are some camofloge, veiners and basketweave

tools that will be good for you to use.

Luke

  • Members
Posted

Have you looked at the Tandy Craft tools there are some camofloge, veiners and basketweave

tools that will be good for you to use.

Thanks for the info but I have looked there. I am looking for stamps that you would use on hatbands ....very small tools....extra extra small tools.

  • Ambassador
Posted

Loot, draw an oval around your makers mark, then experiment with the mention tools

i do beleive any of them will work..

what size is your makers mark.........i'll do a coupla for you tomorrow.

Luke

  • Members
Posted

Loot, draw an oval around your makers mark, then experiment with the mention tools

i do beleive any of them will work..

what size is your makers mark.........i'll do a coupla for you tomorrow.

Hi Luke,

My makers stamp in only 1 inch. I saw Bruce Johnson's stamp and he had these pretty tiny border (half flowers) stamped all the way around his maker stamp. It was real nice. I like to do little projects and I just thought if anyone knew where to find small stamps I would purchase some. Thanks for any help!

  • Members
Posted

You might try looking at some jeweler's stamps. Some are very small, and some you might have to dull a bit so they don't cut the leather. They generally run about 2-3 mm OD.

Hackbarth makes some small stamps too.

I used to be an Eagle, a good ol' Eagle too...

  • Members
Posted

You might try looking at some jeweler's stamps. Some are very small, and some you might have to dull a bit so they don't cut the leather. They generally run about 2-3 mm OD.

Hackbarth makes some small stamps too.

Wow! Everyone is so helpful! Thanks for the great ideas. I will try looking in all the suggested places. Thanks everyone!!

  • Members
Posted

Wow! Everyone is so helpful! Thanks for the great ideas. I will try looking in all the suggested places. Thanks everyone!!

I just found this star that might work for you... the small size is 3/32

http://www.pjtool.com/stardesignmetalstamp.aspx?gclid=CKbvtKSJ7qwCFQVwhwod7HdrQg

A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...