We're Making Some More Tools

[BearMan]

Hi Everybody,

We've been thinking about coming out with some more tools for a while now.

So,,, here we go,,, we've come up with the "Stinger" Awl Handle. The "Stinger" is designed to fit very nicely in the shape of the hand. the "Stinger" in the picture is made with Rosewood, but there are several other woods that would work just fine. Also, another "Very Limited" release of some miniature "Pool Ball Awl Handles". We will only be able to make "about" 12-15 of these, as that's all pool balls we have. No 8 Balls or Cue Balls. Once we find all of them, I'll list what numbers that are available. Of course both of the Awl Handles can be made with a flat spot to help keep them from rolling off the bench.

We now have a line of Petal Lifters, that are made with Hardened Tool Steel, in 3 sizes,,, 1/4",, 7/32",, & 5/32". I made the set in the picture over a year ago, & they have not needed sharpening even once. The handles are designed to fit in the palm of the hand, giving you a lot better control.

Thanks for looking!! Ed the"BearMan" & Beary

LeatherBurnishers@yahoo.com

[mikesmith648]

I want number 13 when it is ready!! Just let me know how much and address and I will send money.

[Bluesman]

Put me down for an awl Ed. I'll take #10. Nice work as usual.

[Spinner]

Looking good Ed! Let me know how much for #3 if it's available when they are done.

Chris

[mikesmith648]

I think I would also like a "Stinger handle" and would look really good if made from cocobolo like the maul you made me.

[BearMan]

Hi Everybody,

Well,,,, I guess I need to find my "stash" of pool balls,,, so I can figure out what numbers I have. If I have those numbers, I will put your names on them. Good thing I have today off,,, hehehe So far, the only numbers I'm sure of are: 6,12, & 14,,, but I know I have a bag of balls in a box somewhere. Thanks,,, BTW, the collet that actually holds the Awl blade, has 2 slightly different sizes, so pretty much any awl bade will fit. The Awl blade pictured with the "Stinger" is just for demo purposes. Thanks for looking,,, Ed the"BearMan"

[BearMan]

I was able to find the Pool Balls a lot quicker than expected. Mike, BluesMan, & Chris, I have your numbers set aside.

Here are the numbers I have left: 1,2,4(x2),5(x2),6, 9(x2),10, 11(x2),12(x2),13,14(x2)15,,, & 1 cue ball. Thanks,,,

[Bluesman]

Ed,

What awl do I use in the handle. Something from SLC? I really need a good awl, badly.

[BearMan]

I believe the one I use most often is a #57 or 56 Osborne. The #56 stitching awl blade is 2 1/4" & the #57 is 2 1/2". But,,, the awls from Douglas are probably the best.

[Bluesman]

Have an osborne and had to sharpen it out of the bag. In my mind tools should come Sharp and ready for use. I need the end awl.