Jump to content

Recommended Posts

  • Members
Posted

Hello Friends

I've ran across a GA3-1 walking foot "heavy duty" leather machine with table and motor for a decent price. I've done my best google-foo and for the life of me I can not find a single thing on the machine.

I thought I had seen a forum thread on here about this machine but for the life of me I couldn't find it even after several searches. Soooo... Does anyone know anything about this machine or where I might find specs and such?

The thing is unusual to me because the pictures show it sittin on the table on the LEFT rather than the typical Right... of course that could be a problem with the type of camera used (mirror image, etc.)

Any and all help is appreciated. Thanks!

Syl

A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"

Posted

What brand is it and do you have a picture ?

I'm old enough to know that i don't know everything.

  • Moderator
Posted

That is a misnomer. The machine is actually a GA5-1. Our dealer, Techsew, sells it with reverse, as the Techsew GA5-1R, already setup to sew leather. Our Dealer Toledo Industrial Sewing Machines sells a comparable machine known as the Cowboy CB2500.

These machines are based on the Singer 45K machines, of long, long ago (The Old Lamplighter days) and can sew 7/16 inch of leather with very thick thread. They are bottom feeders only and will mark the bottom layer. A good spooning or pounding with a Cobbler's Hammer will usually hide the tooth and needle pucker marks.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

Ah Thanks, Wiz. I finally found a chinese trade site that gave a little info. The seller calls it a "walking foot machine." But I trust your expertise Wiz.

Here is the picture Dirtclod.

http://images.craigslist.org/5Fb5Hb5J23I13M43Lac73fa823ca5f55a197a.jpg

http://images.craigslist.org/5N45Lf5T43G53M23Jdc73a3661d7464301f84.jpg

Oh... and my other option is a Ferdco 440R. Opinions?

A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"

  • Moderator
Posted (edited)

Ah Thanks, Wiz. I finally found a chinese trade site that gave a little info. The seller calls it a "walking foot machine." But I trust your expertise Wiz.

Here is the picture Dirtclod.

http://images.craigs...ca5f55a197a.jpg

http://images.craigs...d7464301f84.jpg

Oh... and my other option is a Ferdco 440R. Opinions?

My bad. So, there is a GA3-1 machine after all! I can't see any of the usual walking foot parts in that reversed photo. I guess you will have to go see for yourself. If it does have walking feet, there will be inside and outside feet that alternate up and down, while one moves forward and backward, lifting between stitches. The outside foot may be pulled, or on a spring the fires it forward as the feeder drops. These are pseudo-walking foot machines.

Bring a few 8-10 ounce strips of leather to see how much leather can fit under the foot. If they have thread, try sewing the stack of leather. It should be capable of sewing up to 28-30 ounces of leather.

I hope for your sake that the photo has been flipped and not the machine itself.With the manual visible in photo #2, it sure looks like a left handed machine to me.

Edited by Wizcrafts

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

From the info on that chinese trade site.... it is a lefty machine. The site said it was for shoe making and it has a roller foot.

Here's the link. http://www.diytrade.com/china/pd/7246790/Industrial_Sewing_Machine.html

I think I'll ignore it.

A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"

  • Moderator
Posted

I should warn you that if you buy a machine from China and have it drop shipped to you, it will be a crapshoot as to its sewability out of the box. Most of the dealers I have spoken to have to spend between 4 and 8 hours fixing problems with Chinese machines and adjusting them, tightening loose screws and setting the needlebar and timing, filing bad castings, adding paint where it is missing, assembling the motor and table and balancing the tensions to sew off test samples.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

That machine is a roller foot cylinder bed machine for sewing footwear. It is a clone of the Singer 17 class machine, there is also a version with reverse made by Seiko

It has a roller foot and drop feed, it isn't a walking foot. The type is good for light leather of garment and shoe weight, but I don't know anything about the specific brands you've been looking at though.

-- Al.

Medieval Stuff: http://wherearetheelves.net

Non-Medieval, including my machines: http://alasdair.muckart.net

Posted

The reason i asked about a picture was that 10 or 12 years ago their were a bunch of machines being sold on ebay that facing the wrong way just like in your picture. I don't think i would want one like that.

I'm old enough to know that i don't know everything.

Posted

Ah Thanks, Wiz. I finally found a chinese trade site that gave a little info. The seller calls it a "walking foot machine." But I trust your expertise Wiz.

Here is the picture Dirtclod.

http://images.craigs...ca5f55a197a.jpg

http://images.craigs...d7464301f84.jpg

Oh... and my other option is a Ferdco 440R. Opinions?

Sylvia,

We used to sell this machine years ago before discontinuing it due to a number of reasons including build quality and lack of parts available. It is mounted facing right. It is NOT a walking foot machine, its simply a roller foot machine that is used for shoes and boots. We've since replaced it with the Techsew GA5-1R.

I'll mirror Wiz's comments in warning you not to buy directly from China. You'll encounter many issues related to importing and it won't be worth the headache, plus the costs involved in setting it up properly and finding parts.

What kind of items are you looking to sew?

Ron

5100-se-v3.gif.f5779794b2f4dc18493282052677f874.gif

Techsew Industrial Sewing Machines
Call toll-free: 866-415-8223
Visit www.techsew.com

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...