Members sinpac Posted December 10, 2012 Members Report Posted December 10, 2012 I was wondering if anyone has a link to the Navy manual for the Consew 225 on pdf they can share or a link to where I can find it. I have looked everywhere. TIA, Chris Quote "It ain't about how hard you hit. It's about how hard you can get hit and keep moving forward." - Rocky Balboa
Members Sylvia Posted December 10, 2012 Members Report Posted December 10, 2012 (edited) Sinpac: Join this Yahoo group (use a different email address in case they are email happy) and see if you can get the poster Charles to send you a copy. http://dir.groups.yahoo.com/group/Sewing-with-Industrial-Machines/message/229 Edited December 10, 2012 by Sylvia Quote A teacher pointed at me with a ruler and said "At the end of this ruler is an idiot." I got detention when I asked "Which end?"
Members Gregg From Keystone Sewing Posted December 10, 2012 Members Report Posted December 10, 2012 I think I thought I used to have that in my archive of files. I spent about five minutes after lunch, but no luck. I will upload to my website for download if I can find it a bit later on. Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members sinpac Posted December 10, 2012 Author Members Report Posted December 10, 2012 Sinpac: Join this Yahoo group (use a different email address in case they are email happy) and see if you can get the poster Charles to send you a copy. http://dir.groups.ya...nes/message/229 Thanks Sylvia I signed up. Chris I think I thought I used to have that in my archive of files. I spent about five minutes after lunch, but no luck. I will upload to my website for download if I can find it a bit later on. Thanks for the effort Gregg. Chris Quote "It ain't about how hard you hit. It's about how hard you can get hit and keep moving forward." - Rocky Balboa
Members Gregg From Keystone Sewing Posted December 11, 2012 Members Report Posted December 11, 2012 (edited) http://keysew.com/We...ew225REPAIR.pdf Found it and uploaded it to my website for whoever still wants it. Had a hard time finding this in my archives, I knew I had it somewhere. Oldie but goodie for sure. Edited December 11, 2012 by Gregg From Keystone Sewing Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members sinpac Posted December 11, 2012 Author Members Report Posted December 11, 2012 name='Gregg[/color] From Keystone Sewing' timestamp='1355234761' post='277884']http://keysew.com/We...ew225REPAIR.pdf Found it and uploaded it to my website for whoever still wants it. Had a hard time finding this in my archives, I knew I had it somewhere. Oldie but goodie for sure. Thanks a lot Gregg. My problem is my walking foot is not running perfectly parallel with the throat plate and I can not find where to turn the walking foot rod to make it parallel. Got any idea's? Chris Quote "It ain't about how hard you hit. It's about how hard you can get hit and keep moving forward." - Rocky Balboa
Members Gregg From Keystone Sewing Posted December 13, 2012 Members Report Posted December 13, 2012 Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members Davidstryingtosew Posted November 22, 2013 Members Report Posted November 22, 2013 Thanks for sharing the manual! Just found a really nice 225 from Atlas Levy on ebay. Spoke to the owner and he says he goes through every machine and gets them running right. Cant wait to get it! This will be my very first sewing machine! David Quote
Members Tejas Posted December 4, 2013 Members Report Posted December 4, 2013 Here is a link to the original document -- chapter 4. http://navybmr.com/s...EDTRA 14217.pdf Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.