Members shtoink Posted December 17, 2012 Members Report Posted December 17, 2012 This may not come as much of a surprise to many, but is still worth bringing up. After some chatting about leather dust created on projects with some of the regulars in the chat room a little while back, I couldn't get it out of my head. There was one thing that kept nagging my mind and I finally decided to put some research into it. It didn't take long to find and I was a bit surprised at just how serious a matter it has the potential to be. It's the possibility of nasal and lung cancer from exposure to the carcinogens in the dust created from sanding, grinding, and buffing leather. The solution is a simple one: Dust masks. During my searches, it was mentioned on one site that there was about 10 times fewer articles on leather crafting hazards than wood working hazards. That should not be much of a surprise, though. There aren't as many people working with leather as there are with wood. I know that I am guilty of failing to observe the use of dust masks and many an occasion, I just had no idea just how risky it actually was. As with everything else carcinogenic, it may or may not affect you quickly. There are plenty of smokers out there who never develop a smoking related cancer after 40+ years at it, but on the opposite end of the spectrum there are those that develop a cancer within a few years of starting. Bottom line, you just never know if and when it can happen, but it can't hurt to err on the side of caution and wear some protective gear when you do things that put you at risk for these sorts of things. This isn't scare tactic of any type. I'm not trying to make anyone stop messing with their leather or prevent anyone from starting. I just wanted to bring the potential risk, and a solution, to the attention of those that may not know. Dust masks are the way to go. If you'd like to read a little more information on the subject, I have a link here and here. The other option is to use my original search terms and look around for yourself. "leather dust carcinogen" Once again, this isn't to scare anyone, only educate with the risks and provide a solution for prevention. Quote
Moderator immiketoo Posted December 17, 2012 Moderator Report Posted December 17, 2012 Good post Oink. I have a respirator I use for gluing and it will be getting more use. Quote Learnleather.com
Members George B Posted December 17, 2012 Members Report Posted December 17, 2012 Never really thought about it much, but it is definitely time to dust off the old dust mask. Thanks! Quote
Members conceptdiba Posted December 22, 2012 Members Report Posted December 22, 2012 Good post Oink. I have a respirator I use for gluing and it will be getting more use. Could you please recommend one for me? I use leather glues a LOT. I really should be more proactive and get some sort of respiratory protection, but I'm not really sure what it is I should get exactly. Quote
Moderator immiketoo Posted December 22, 2012 Moderator Report Posted December 22, 2012 anything by 3M that is rated for VAPOR will be fine. Quote Learnleather.com
Members Anacott Steel Posted December 26, 2012 Members Report Posted December 26, 2012 Having just airbrushed a piece and feeling light headed as I stupidly was using a t-shirt as a respirator mask, your post reminded me of a great post in this forum about how just toxic dies can be - particularly the oil based ones if I recall. Guess health and safety is usually front of mind when we are using tools but not so when it comes to inhaling potentially damaging chemicals, so thanks or the heads up / reminder Oink. Quote
Members billymac814 Posted December 27, 2012 Members Report Posted December 27, 2012 It's sounds simple enough to wear a dust mask but how many of us will wear one all day long? It is a serious issue and one I've been trying to solve but I'm guilty of not taking safety precautions. I do have a vacuum system attached to my sander so that helps although its very old and not as effecient as newer models and I recently bought a bench top spray booth for air brushing and spraying chemicals but I still have the glue to deal with. I've looked at fume busters but they are very expensive, 3-4k. I will likely be building my own soon, it will be similar to a downdraft sanding table that will suck the fumes down and then outside, Im going to build it right into a section of my work bench where i do most of my glueing and it should be comparable to the commercially available fumebusters, you can see examples of them on Shoe Systems Plus website if anyone wants to see, they are pretty simple in design. I did use a respirator while spraying before I got the booth but not for glueing. My family spends a lot of time near my shop which is the main reason why I'm trying to improve the safety of the shop space. My customers always come in and say "I love the smell in here" and its not leather, they are smelling glue fumes more than the leather. Quote www.mccabescustomleather.com
Moderator immiketoo Posted December 27, 2012 Moderator Report Posted December 27, 2012 I made a surprisingly effective spray booth out of a clear plastic tote, a home furnace filter and a shop vac. It works incredibly well for airbrushing, but I haven't tried glue fumes due to the highly flammable nature of them. Cut a hole the size of your vac hose in the bottom of the side of the tote, with it oriented with the open top towards you. Stick the hose in the hole, put the filter in front of the hose and turn it on. I don't even put my mask on anymore when I airbrush, it works so well. It's not permanent and I have to move it every time I want my bench space back, but I can fill it up with stuff and put the lid on it. And it cost all of 11 bucks since I had the other stuff. Quote Learnleather.com
Members billymac814 Posted December 27, 2012 Members Report Posted December 27, 2012 Very good idea. My spray booth is basically a very similar design in the way it works. Its a large metal box with a filter and a squirrel type cage/motor type thing. I vented mine outside as well with flexible hose similar to dryer hose vents. I picked mine up at an auction for I think 5 bucks. No one else had an interest in it or maybe they didn't know what it was. As for glue fumes I think you'd want it to be similar to that but have it sucking down instead of towards the back, that is how the ones that are designed for that are made. The plus to that is its basically a work bench but its either mesh or maybe even something like peg board would work. Here is the issue of flammable things so you'd want to make sure that you use the correct type of motor/ blower type thing. I believe a squirrel cage is what you'd want since the motor is outside of the area that the fumes travel in. Its my goal for this year to have something in place to get rid of the glue fumes. Quote www.mccabescustomleather.com
Members Micrez Posted March 25, 2014 Members Report Posted March 25, 2014 How about when skiving leather? Or cutting leather in general? Would this only be for fine particles? I've been working with leather for about a year and didn't think twice about it. Till about two months ago when I was searching for alternative glues to use other than Barge. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.