DHopper Report post Posted January 8, 2013 Wasn't sure if I should post this up here or over in the luggage forum. Decided that since I made it primarily to serve as a gun case; here it would go. Since I purchased my first single action revolver I had the idea of turning a late 1800s suitcase into a gun case. Given that the cowboy era was what they reminded me of; and the fact that I can't walk around sporting a double holster rig, I wanted a case that looked the part. The problem I ran into was finding a suitcase in a condition that was good enough to actually use that didn't cost more than both my single actions combined. I used to see these things at sales and antique shops for next to nothing; at least until I wanted one. So it seemed to me that I had one option .... Make one from scratch. The case is 17"x12" od and 16"x11" id approximately. I used all heavy veggie tanned tooling hide in 6-8 oz. It has a cardboard base form which the leather was wrapped and attached. It was all hand stitched as well. I made the handle by wrapping a 1/4" aluminum rod that I bent to shape. I definitely learned a ton with this project. I would rearrange a few steps in the process next time around to quicken it up and save some headaches along the way. I would have definitely built a seperate interior form and lined that then installed it before putting in any rivets. All in all I'm super happy with it. Now to get it oiled up and waterproofed. Quote Share this post Link to post Share on other sites
benlilly1 Report post Posted January 8, 2013 Wow...now that's a gun case!! Quote Share this post Link to post Share on other sites
Driften Report post Posted January 8, 2013 That is an excellent gun case. Quote Share this post Link to post Share on other sites
immiketoo Report post Posted January 8, 2013 Dear God in heaven, thats beautiful! I want to make one... Quote Share this post Link to post Share on other sites
DHopper Report post Posted January 9, 2013 Thank you! I'm really happy with the outcome. Like a lot of projects; especially the ones that seem so daunting and are the first time trials, it takes a few days for it to sink in that its done and that I really did just make that. I'll post up a few more pics after I oil it up. Still trying to determin exactly what I'm going to treat it with. I'm back and forth on just spraying it with waterproofing. That will darken it slightly like an oil, but adds a big weather barrier. What would you all do? Quote Share this post Link to post Share on other sites
immiketoo Report post Posted January 9, 2013 Dude, I'd oil it and then atom wax it. Classy. Quote Share this post Link to post Share on other sites
mattsh Report post Posted January 9, 2013 Man that is sweet! Awesome job. Don't suppose you'd make a tutortial for that? Quote Share this post Link to post Share on other sites
camano ridge Report post Posted January 9, 2013 I would oil it then use Montana pitch blend or Skidmores cream Both are natural product using a mix of Bees wax mink oil and other products. Either product will give it protection with a rich low gloss look. Quote Share this post Link to post Share on other sites
electrathon Report post Posted January 9, 2013 I really like this, cool idea. Quote Share this post Link to post Share on other sites
chiefjason Report post Posted January 10, 2013 That is stunning! I'm thinking just a mellow oiled color. That would be classy! Quote Share this post Link to post Share on other sites
St8LineGunsmith Report post Posted January 10, 2013 (edited) wOw! I like that, you did a fantastic job on it. Edited January 10, 2013 by St8LineGunsmith Quote Share this post Link to post Share on other sites
Eaglestroker Report post Posted January 10, 2013 Excellent! Quote Share this post Link to post Share on other sites
SooperJake Report post Posted January 11, 2013 Nice! Quote Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted January 12, 2013 I'd look into using Sno-Seal on it. Did you use pop rivets on the corners? Quote Share this post Link to post Share on other sites
Crystal Report post Posted January 12, 2013 Very nice! Quote Share this post Link to post Share on other sites
jpaltan Report post Posted January 12, 2013 Beautiful case. Really like the contrast on the reinforcement corners and the handle compared to the rest of the leather (though not sure if it just a contrast via the photo) I would have cut the binding straps from that same leather to unify the color a bit if leaving a natural finish. (though this advice comes from someone who has made a knife case and a watch band, so not sure if I have any weight in comments or criticism). What did you use for the egg crate material? I'm looking into building a pistol case for a 1911 and some ammo (if I can ever find some again) and am concerned about different padding materials wicking the oil from the gun. Quote Share this post Link to post Share on other sites
BIGGUNDOCTOR Report post Posted January 12, 2013 I'd say if you have enough oil on it to wick away you have too much. Quote Share this post Link to post Share on other sites
renegadelizard Report post Posted January 14, 2013 not much else to add here..that is some fine work...very creative and to be done with out a store bought pattern is really something... Quote Share this post Link to post Share on other sites
DHopper Report post Posted January 14, 2013 Thanks so much everyone! I'm loving it more every day. I've gotten one good even coat of our vegetable oil on it this weekend. It really gave it a rich golden color. I'll need to topcoat it for the final step. Think i'll use the 50/50 mop-n-glo & water treatment. Cheap, easy, it works great, and I've got some in the cabinet. I used the foam from a cheap gun case from Walmart. It came with the top and bottom egg crate, as well as the 1 1/2" pick & pluck foam. Just had to trim about an inch off one edge. I might try to work up a pic/video tutorial when I do another one. I'm going to do a small single revolver case, too. In that one ill try to do the felt custom interior. Quote Share this post Link to post Share on other sites
