Jump to content

Recommended Posts

  • Members
Posted

Seems we have two parallel threads going on this subject......for my reply and a link to stitching horse plans, look here.

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted (edited)

I have a copy of the "Farm Woodwork" Stitching Horse if you'd like. I found it on Google and it's ok to pass around because of the copyright/print date.... It's lived long enough to outlive the Copyright and enter into the public domain.So, here ya go! You can go HERE and get it! Hope it helps!!
That helps a bunch and thanks for the link sir. :You_Rock_Emoticon:
Seems we have two parallel threads going on this subject......for my reply and a link to stitching horse plans, look here.

Spock! Bones! Parallel univer... er... threads. :Holysheep: I am just now aware of this and thanks sir. Edited by DEADEYE
  • Members
Posted
:google0dw: Google "farm woodwork stitching horse"

There's a google book for this. See page 99.

I have found this Google book, and can view the images. I can down load, but when I go to open the PDF file, I get a "file broken cannot be repaired" message. If any one has it that can open it and would like to forward it to me I would sure appreciate it. Thanks.

  • 1 year later...
  • Members
Posted (edited)

DEADEYE,

I made this one a while ago. It uses the threaded rod from an old Jorgenson woodworking clamp. The rod has an acme thread so it tightens and loosens with only a turn or two. It holds the work very securely. I lined the jaws with hard adhesive backed felt (it was a hunch) It works very well, holds the leather and does not damage it's surface.

Sorry I do not have any plans as I kind of built it as I went along.

Jim

S Horse 1.jpg

S horse 5.jpg

post-9957-126814184343_thumb.jpg

post-9957-126814200246_thumb.jpg

Edited by JamesR
  • Members
Posted

DEADEYE,

I made this one a while ago. It uses the threaded rod from an old Jorgenson woodworking clamp. The rod has an acme thread so it tightens and loosens with only a turn or two. It holds the work very securely. I lined the jaws with hard adhesive backed felt (it was a hunch) It works very well, holds the leather and does not damage it's surface.

That's awesome, I was thinking that my small apartment can't fit any one of these things and hanging onto the work while sewing doesn't work so well, so I was figuring of just padding a wood clamp.

  • 2 weeks later...
  • Members
Posted

Hey Deadeye, if there's ONE thing that all of those stitching horses need, it's to have the ground seat shaved down on the edges of seat! Even the thickest chunk of sheepskin won't soften those edges, and I can guarantee (from past experience) that it's not gonna be too comfy after a long session.

I do kinda like the second photo - the legs are set into the braces, nice woodworking to last a good long while.

Kate

KATE'S CUSTOM GUNLEATHER

and

KATE'S CUSTOM BRIDLEWORKS

Sultan, WA USA

  • Members
Posted

Hey Deadeye, if there's ONE thing that all of those stitching horses need, it's to have the ground seat shaved down on the edges of seat! Even the thickest chunk of sheepskin won't soften those edges, and I can guarantee (from past experience) that it's not gonna be too comfy after a long session.

I do kinda like the second photo - the legs are set into the braces, nice woodworking to last a good long while.

Kate

For sure Kate. I also going to divy out butt cheek recesses and cover the sitting area with 1" closed cell foam and a nice piece of leather. Back rests will be an option too.

DEADEYE,

I made this one a while ago. It uses the threaded rod from an old Jorgenson woodworking clamp. The rod has an acme thread so it tightens and loosens with only a turn or two. It holds the work very securely. I lined the jaws with hard adhesive backed felt (it was a hunch) It works very well, holds the leather and does not damage it's surface.

Sorry I do not have any plans as I kind of built it as I went along.

Jim

That's very creative and resourceful James. Good job!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...