Members wayner123 Posted April 2, 2013 Members Report Posted April 2, 2013 Hey all, I am going about my first holster and I really like the idea this guy has in the picture below. But I am not sure what it's called, or what exactly it is. If you can help me out I would greatly appreciate it. Quote
Members dustinking Posted April 2, 2013 Members Report Posted April 2, 2013 Its ushally just a little piece of fuel hose Quote
Members Craig44 Posted April 2, 2013 Members Report Posted April 2, 2013 Yep, it should have a screw in it to adjust tension. Quote
Members wayner123 Posted April 2, 2013 Author Members Report Posted April 2, 2013 Thanks so much. Now to go find some... Quote
Members camano ridge Posted April 2, 2013 Members Report Posted April 2, 2013 You can find everything you need . Basically fuel hose cut to your length, cup washer, t-nut and screw. However if you are not sure of yourself you can buy everything you need from these people the first time so you can see what to buy. http://oldfaithfulholsters.com/shop/hardware-replacement-pack/ Quote
Members Matt Alsaker Posted April 2, 2013 Members Report Posted April 2, 2013 I use black oxide Chicago screws with a piece of fuel line. I went to several different automotive and hardware stores before I found a fuel line I liked. The first couple I bought were to rigid. Fuel line is sold by the foot for about $1.25 depending on the store. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.