Northmount Report post Posted October 24, 2013 Canadian source: Princess Auto has a 12 piece drive punch set for $16.00. Sizes from 1/8 to 3/4". Made in China. Knurled handle. Need sharpening, but what do you expect for the price? 3/4" on 8 oz leather, took around 20 hits with a 1# dead blow hammer versus 3 hits with a sharp arch punch. So for the beginner or for occasional use, I think it's a good deal. http://www.princessauto.com/pal/en/Sets/12-pc-Hollow-Punch-Set/2920169.p Tom Quote Share this post Link to post Share on other sites
Tree Reaper Report post Posted October 24, 2013 I bought that set on line a few years ago, they do require sharpening but will cut just fine over a poly board once sharpened properly. Quote Share this post Link to post Share on other sites
MadMorbius Report post Posted October 25, 2013 I use that set occaisionally but they're the bevel is a little steep. I usually use a size smaller than I need on ehavier leathers as the steep bevel will enlarge the hole. Quote Share this post Link to post Share on other sites
Gump Report post Posted October 30, 2013 Took a bench grinder to my set and ground off the heavy taper, resharpened and polished a bit and now they work fine. I did have to smooth out the bore a bit so the plugs would push through. Crude , but cheap and usable with work. Gump Quote Share this post Link to post Share on other sites