MadMorbius Posted December 11, 2013 Report Posted December 11, 2013 Hi folks, does anyone know where I can source a roller guide for use with a Juki LU-563? Ebay has yielded a couple of results but i'm not certain they're compatible. I'm wary of the effectiveness of these magnetic material guides commonly available. Appreciate any sources that can be shared. Quote
Members Tejas Posted December 11, 2013 Members Report Posted December 11, 2013 (edited) Gregg at http://store.keysew....nded-edge-guide sells the Juki MAH-152010A0 Suspended Edge Guide Ruler Kit for $225 on that Web sire and for $185 on eBay at http://www.ebay.com/...t-/270936108930. You might contact Gregg with the compatibility question. I have one on my Juki 1508 and like it Edited December 11, 2013 by Tejas Quote
Members TomG Posted December 11, 2013 Members Report Posted December 11, 2013 I just bought a guide for Gregg at Keystone for my Singer 111W155. Although I had to drill and tap 1 hole, it was a pretty easy task and works like a champ. I think it was a clone/Asian version of the Juki, but he can fill you in on any particulars for your needs. He's good to do business with. Quote
MadMorbius Posted December 12, 2013 Author Report Posted December 12, 2013 Thanks, I've sent him an email. Quote
Members Gregg From Keystone Sewing Posted December 12, 2013 Members Report Posted December 12, 2013 Madmorbius, Don't think I seen your email in my inbox, just in case you think I'm not responding. All the best. Gregg Quote
MadMorbius Posted December 12, 2013 Author Report Posted December 12, 2013 Thanks Gregg. Simple question really, will the roller guide referenced above fit the LU-563? Quote
Members phillthethrill Posted March 8, 2015 Members Report Posted March 8, 2015 So what's the verdict, will it work? Quote
Members Constabulary Posted March 9, 2015 Members Report Posted March 9, 2015 (edited) I have added one to my Singer 111 a couple of weeks ago - they are great! Mine has two changeable guides - one roller and one straight. Edited March 9, 2015 by Constabulary Quote
Members Gregg From Keystone Sewing Posted March 9, 2015 Members Report Posted March 9, 2015 Thanks for the kind words. Both machines mentioned here, Singer 111W155 and Juki LU-563 can use these swing guides, but like said, holes into the cast iron will have to be drilled and tapped for this to mount onto the back of the arm of the machine in this case. Some models already have holes than can vary from model to model in location and tap thread sizes, but this is not the case here. Thanks again. Quote
Members Wishful Posted March 10, 2015 Members Report Posted March 10, 2015 I am looking to get a edge guide for my Adler 67gk373 but not sure how to go about making the holes to mount it. any tips? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.