Members rdl123 Posted January 2, 2014 Members Report Posted January 2, 2014 I need a simple leather skiver for taking skirting and latigo down to desired thicknesses... I have come up with this idea and am wondering if someone with skiving experience can let me know if this will work or not - I have a friend who can machine it all for me - probably use aluminum instead of the mild steel I show in the drawings. Please comment if you have a moment! MT, rdl Quote
electrathon Posted January 3, 2014 Report Posted January 3, 2014 You will need to add cam adjusters to the roller. The adjustment on a splitter is very sensitive, I doubt that you can do it with a simple slot. The blade will need to be sharp. If you do not start bleeding just from being near it it needs to be sharper. Do not cut a secondary angle on the blade except to set the burr. Second thought, I don't know how you will get the leather to start into the splitter, usually pull through splitters have a lift feature. Quote
Members veedub3 Posted January 3, 2014 Members Report Posted January 3, 2014 If you do not start bleeding just from being near it it needs to be sharper. LOL Quote "The only man who makes no mistake, is the man who does nothing." Theodore Roosevelt
Members J Hayes Posted January 3, 2014 Members Report Posted January 3, 2014 (edited) Bruce Johnson had a few 6" Osborne #86, might be worth just buying one instead of building one. Or look at the tandy one or I think Cowboy has one, see ebay. Might give you ideas on how to cam the roller down so you can start thr split Edited January 3, 2014 by J Hayes Quote
Members rf744 Posted January 3, 2014 Members Report Posted January 3, 2014 What about just putting the bolts off center? Maybe you wouldn't need the slot. If the bolts had wing nuts, you could loosen them then adjust by just moving the roller. It need not turn, I think. Just my a thought. Haven't actually tried it. Quote
Members rdl123 Posted January 3, 2014 Author Members Report Posted January 3, 2014 Electrathon - The sensitivity of a skiver - Is this in regards to the roller being perfectly parallel to the blade (if you were looking at it from the top down), the cutting edge of the blade being perfectly centered over the roller, or the gap (cutting dimension) being perfectly true? I have no experience with these things and don't want to put money into this if it won't work - I'd called Bruce Johnson the other day but he must have been away - Will try to get ahold of him again... MT, R Quote
electrathon Posted January 3, 2014 Report Posted January 3, 2014 The gap between the roller and the blade is a very precice measurement. If it is off your split (it is a splitter, not a skiver) leather will be tapered. Like 9 oz on one side and 7 oz on the other side (that is with only 1/16" variance). Quote
Moderator bruce johnson Posted January 4, 2014 Moderator Report Posted January 4, 2014 RDL, If you want to give me a call, I should be around most of tomorrow as of current plans. If you happen to miss me, leave a message and I'll call you back. Thanks, Bruce Quote Bruce Johnson Malachi 4:2 "the windshield's bigger than the mirror, somewhere west of Laramie" - Dave Stamey Vintage Refurbished And Selected New Leather Tools For Sale - www.brucejohnsonleather.com
Members silverbullet Posted January 7, 2014 Members Report Posted January 7, 2014 You could easily use 2 eye bolts to regulate the depth of cut with wing nuts and a locking nut . Then on the blade mount if you spring mount it down you could tilt the blade up then as you start to pull your cut the blade would go right down and stop with the spring pressure. Should work Quote
Members rdl123 Posted January 8, 2014 Author Members Report Posted January 8, 2014 FYI - I can buy an Osborne from Bruce for about what it would cost to make this unit (By the time it is water jet cut and machined). I talked to Bruce and will be buying a Osborne from him - Just need to save up a couple bucks first. rdl Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.