Jump to content

Recommended Posts

These pieces are both Hermann oak leather side pieces, oil dyed with a light color dye, then I oiled with pure neatsfoot oil. Left oil sit now for two full days and the left hand piece is way darker. Am I doomed our can I fix this somehow?

Pic

0129142031.jpg

0129142031.jpg

post-36557-0-28115100-1391050357_thumb.j

post-36557-0-96750200-1391050574_thumb.j

Share this post


Link to post
Share on other sites

I can't help much as I'm very new to all this but I've been playing around with neatsfoot oil the past few weeks and have found results can be inconsistent. I had two separate pieces cut from the same hide and not dyed. Oiled both in the same way (same bottle, same applicator same number of coats). One looks like a slightly darker shade of natural leather as I expected. The other looks like it's been dyed light or medium brown. Very similar to what you're showing but perhaps a little more contrast between them)so I'd be interested to hear the how's, why's and any fixes (though in my case they weren't going to be used together so doesn't matter).

Share this post


Link to post
Share on other sites

Neatsfoot oil is notorious for turning leather darker. Unfortunately, if you are going for the lighter color you will have to more then likely have a redo. I recommend trying a conditioner like Bick 4 on a scrap piece and seeing how it does for you.

Share this post


Link to post
Share on other sites

Thanks, I think I will try some conditioners.I'm tired of this happening.

Luckily its not very far along, so not much time lost

Share this post


Link to post
Share on other sites

In my (still very limited) experience you have to be careful getting a consistent amount of neatsfoot oil or you increase the chances of this happening too. The flesh side will really soak it up and will also make you want to put on more so that all of it has been oiled. This can lead to putting more in one place that another and more on one piece than another. If you don't have an airbrush to apply it with (I don't) then you have to be careful and/or just apply it to the skin side.

I love neatsfoot oil and love that I can use it as a super light colored dye without using dye. But I have also learned to be careful to only apply it on the skin side on thinner leathers and be extra careful when applying it to the flesh side on thicker leather. It sounds a bit like, at least in this case, you will abandon neatsfoot oil but in other projects where you might want to use it this might be good to think about.

Dave :)

Share this post


Link to post
Share on other sites

The best advice I can give you is to get rid of the neatsfoot oil and get some Bee's Natural Saddle Oil. It will not darken your leather, and if anything, will give it a golden tone. Good stuff.

Terry

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...