Members CDragonworks Posted February 6, 2014 Members Report Posted February 6, 2014 Does anyone know why this old beast would rock back and cause the machine to bugger the thread on the underside. It is not the bobbin thread that is the issue but the walking foot/needle rocking back it you have to stop or slow down... we have tried every thing to adjust the timing to stop this and have had it to the shop more than I care to say. We replaced the entire hook assembly and now it is giving me more problems in that not only does it rock back on the topside but it now packs the thread under the darn bobbin case... which the old assembly never did and the new did not do until more than a year out. I am wondering if the machine is just worn out. I sew on this thing A LOT so I know I have run her to the ground. but I oil her all the time and keep them clean. We did find that a heavy rubber band on the walking foot at the back top will slow down the rocking for a time but it breaks fairly quickly.... Quote
Northmount Posted February 7, 2014 Report Posted February 7, 2014 Does anyone know why this old beast would rock back and cause the machine to bugger the thread on the underside. It is not the bobbin thread that is the issue but the walking foot/needle rocking back it you have to stop or slow down... we have tried every thing to adjust the timing to stop this and have had it to the shop more than I care to say. We replaced the entire hook assembly and now it is giving me more problems in that not only does it rock back on the topside but it now packs the thread under the darn bobbin case... which the old assembly never did and the new did not do until more than a year out. I am wondering if the machine is just worn out. I sew on this thing A LOT so I know I have run her to the ground. but I oil her all the time and keep them clean. We did find that a heavy rubber band on the walking foot at the back top will slow down the rocking for a time but it breaks fairly quickly.... Pictures? What machine, what thickness of leather, what thread and needle? Need more information for people here to be able to diagnose and help resolve the question. Tom Quote
Members cdthayer Posted February 7, 2014 Members Report Posted February 7, 2014 What do you mean by “rock back”? I’ve never heard that term. I had a problem with thread being shredded on a Consew 225. It turned out to be a new foot that had a thread channel made in it, but when the needle hole had been drilled, the burr wasn’t cleaned out of the thread groove. Probably not your problem, but I thought I would mention it. CD in Oklahoma Quote
Members Logans Leather Posted February 12, 2014 Members Report Posted February 12, 2014 Please give us a thorough description of what you mean by "rocking back" so we can analyze and address the issue Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.