RoosterShooter Report post Posted February 25, 2014 (edited) Where can I find a gun mold for a S&W 629 and S&W 500 Mag. mold? I have looked everywhere and I can't find anyone who makes them. For reference ... it would be the Smith & Wesson N Frame and X Frame. Thanks. Edited February 25, 2014 by RoosterShooter Quote Share this post Link to post Share on other sites
Colt Hammerless Report post Posted February 25, 2014 Here's an N-frame: http://www.shop.bunkhousetools.com/Magnum-4-Barrel-929.htm I doubt there's an X frame, but Duncan's Customs may have one. They have an inventory list, but I think that only shows what they have in stock, not necessarily all they're capable of producing. Might want to send them an email. Paul Quote Share this post Link to post Share on other sites
camano ridge Report post Posted February 25, 2014 The only N frame I know of is from Bunkhouse tools they list as Mgnum. THe problem is over the years there has been several variations of the N frame even with in a specific model. I know of no one that has a S&W .500 mag holstermold/training gun/ dummy gun. These are the only manufactures of holster molds/ training guns/dummy guns are Rings - Blue guns, Duncans Outdoor, ASP, Blackhawk, and Multi mold (Multi Holster Company). THere are some smaller producers, Jared a member on these forums makes primarily semi auto molds and they are a limited veriety. If you have not already, let Jason at Duncans know what you want. He keeps a list and if they have enough requests they will make the mold. Quote Share this post Link to post Share on other sites
Eaglestroker Report post Posted February 25, 2014 I discussed having a modular set made with a 3d modeler about a year ago for the N frame with screw on barrels/frames. There are so many cylinder and barrel configurations the cost would be significant. Unfortunately (or fortunately) you have to buy a lot of guns to work witth Smith and Wesson revolvers. Quote Share this post Link to post Share on other sites