Jump to content

Recommended Posts

  • Members
Posted

This is my first post on this site with the exception of my introduction. What I like to do the most in leatherwork is wet molding. Molds are made on a wood lathe, bowls are 2 to 3 thicknesses of leather. The layers are glued wet, together with titebond (a wood glue) and left to dry. A lot of clamping is used. Still have not come up with a good way to trim it round when it's dry. The thickness at this point is 1/4 to 3/8" and because of the plywood effect of the leather and glue, is very tough to cut by hand. Still have a lot to learn, finishing being one of my biggest weaknesses.

post-54205-0-74644600-1407460981_thumb.j

post-54205-0-88495500-1407461254_thumb.j

post-54205-0-89707400-1407461423_thumb.j

  • Members
Posted

Those are very handsome bowls! And your braiding is really really nice. Super work.

Posted

Very nice - I'm surprised how nice the finish looks. I would have thought the Titebond on wet leather would bleed through. From the pictures I see absolutely nothing wrong with the finishing. The dark braiding really sets these bowls off.

Thanks for showing!

  • Members
Posted (edited)

These are very interesting and nice. I have been hired to do custom head pieces in the past, armor-like, for paintball people, this gives me good ideas, thanks very much....b

Edited by luxefaire
  • Members
Posted

Very interesting project. Those look great. You said that finishing was one of your weaknesses. What finish did you use? Also what weight are your leathers before glue up? Looks like something I'd like to try.

Rohn

(John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV)

  • Members
Posted

A very well done unique item. The dark stitching looks great with the lighter color bowl.

  • Members
Posted

Very cool! For trimming, I'd make some leather covered forms and at least try doing it on the lathe. Of course, I'm using a metal lathe with a 3-jaw chuck which you might not have if you're using a wood lathe. Seems like with a fairly closely fitting form in the headstock and another in the tailstock, maybe with some of those no-slip bench pads in betwixt, you could apply enough pressure with the tailstock to accomplish the trimming as long as you use a very sharp parting tool and very light pressure.

Whatever the case, whatever you're already doing looks very, very nice!

-Matt

  • Members
Posted

I'd use something like a potters wheel. Make a rigid arm with a blade on the end andadjust it in slowly to apply the cut. Sorta like a lathe...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...