Members Constabulary Posted August 22, 2014 Members Report Posted August 22, 2014 I have a very nice and clear instruction manual for the 29K58 / 29K62 as a PDF and would like to share it but I cannot upload it as it is 2.5 MB. It also includes instructions for adjustments. Any chance that I can send it to an administrator who can add it to this post? It is really nice and clear and not a poor photocopy. I really think it is worth sharing it. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Gregg From Keystone Sewing Posted August 22, 2014 Members Report Posted August 22, 2014 Send it to me, it will be uploaded to our server and I'll share a link for everyone to see and download on this thread, if you like, or you can link to the URL and do what you want with it. Cheers Quote Industrial sewing and cutting, parts sales and service, family owned since 1977, Philadelphia, Pennsylvania USA, 215/922.6900 info@keysew.com www.keysew.com
Members Constabulary Posted August 23, 2014 Author Members Report Posted August 23, 2014 (edited) Hey Gregg, I haven´t thought of it so I put it on a server on my end It is a 20MB file so download may take a few seconds but the manual is sharp + clear. Here is the direct download link: Instruction Manual Singer 29K58, 29K62 This manual of course will work for 29K71 and others as well, especially those with removable gear box. Edited August 23, 2014 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Moderator Wizcrafts Posted August 23, 2014 Moderator Report Posted August 23, 2014 Hey Gregg, I haven´t thought of it so I put it on a server on my end It is a 20MB file so download may take a few seconds but the manual is sharp + clear. Here is the direct download link: Instruction Manual Singer 29K58, 29K62 This manual of course will work for 29K71 and others as well, especially those with removable gear box. Your download is behind a password protected web page and can't be accessed by the public without the proper credentials. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Constabulary Posted August 23, 2014 Author Members Report Posted August 23, 2014 (edited) is solved, I already noticed it I have uploaded the larger file so the quality is much better. Edited August 23, 2014 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted February 11, 2015 Author Members Report Posted February 11, 2015 (edited) I have another nice one for the later type 29K series. Very useful information, nice & clear instructions and a great parts list. Direct download link: Service Manual and Parts List for Singer 29K71, 29K72 and 29K73 But I think it is helpful for other 29K subclasses as well. The parts list is very helpful for disassembling and reassembling!!! Edited February 11, 2015 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Sovran81 Posted October 8, 2015 Members Report Posted October 8, 2015 Does anyone know the difference between a 29k58 and other 29k's? I need to get some parts and need to know what parts manual to use. Quote
Members Constabulary Posted October 9, 2015 Author Members Report Posted October 9, 2015 (edited) Best way to find out is comparing part numbers + parts lists. 29K´s have a lot of subclasses and some just have minor differences. I would assume that most 29K71 parts will work for the 29K58 as well but cannot promise. http://leatherworker.net/forum/index.php?showtopic=64040&p=428550 Edited October 9, 2015 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Sovran81 Posted October 9, 2015 Members Report Posted October 9, 2015 The only parts manual I have is so small when blown up to readable it is very blurry. College sewing doesnt have my parts list so I am trying to figure out how much mixes and matches. Quote
Members shoepatcher Posted October 10, 2015 Members Report Posted October 10, 2015 The 29K 58 is a short arm, small bobbin machine. You should be able to use the 29K70 and 29K71 manuals for parts. Only difference between the machines might be the adjustment on the take up lever that regulates the amount of lift of the lever and the throat plate screw. Later models of the 29K 70 and 71 had the stud and front set screw to secure the needle plate. Before that,n Singer used the screw #ss84 or later called #109084 which was a shoulder screw. Threads were 3/16"x 28 pitch. Singer used this screw for the needle plate from the first patcher in the late 1870's until the late 1950's! I am going to have these built in a few years when I retire with an Allen head instead of the straight slot that is too shallow and always gets buggered up. glenn Quote
Members Sovran81 Posted October 11, 2015 Members Report Posted October 11, 2015 Thank you Glenn. Yes the take up lever adjuster is shown in two versions for my machine. Since I need the plunger it screws into also I ordered both parts for a 70. Please correct me if I am wrong but this adjuster is how you adjust top thread tension instead of using the tension discs? Quote
Members Ole South Posted November 28, 2015 Members Report Posted November 28, 2015 Links to manuals broken 404 error Quote
Members Constabulary Posted November 28, 2015 Author Members Report Posted November 28, 2015 (edited) I know - manuals folder has been deleted by mistake - sorry folks. Please end me your email by PM and I will send you the files Edited November 28, 2015 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted November 28, 2015 Author Members Report Posted November 28, 2015 (edited) Both files are online again Service Manual and Parts List for Singer 29K71, 29K72 and 29K73 Instruction Manual Singer 29K58, 29K62 Edited November 28, 2015 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Ole South Posted November 28, 2015 Members Report Posted November 28, 2015 Thanks Cons!! Quote
Members newfieboy Posted February 20, 2020 Members Report Posted February 20, 2020 could you sent the manuals to steve_warren03@outlook.com Thanks! Quote
Members Constabulary Posted February 21, 2020 Author Members Report Posted February 21, 2020 This is the best manual you can find for 29K58 to 29K73 machines. Machines from 29K58 up to 29K73 are very similar. https://leatherworker.net/forum/applications/core/interface/file/attachment.php?id=149218 Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members WLS Posted September 29, 2020 Members Report Posted September 29, 2020 Looking at purchasing a singer 29k62, I was going to download the user and service manuals but I get an error, are they no longer available ? ? Quote
Moderator Wizcrafts Posted September 29, 2020 Moderator Report Posted September 29, 2020 18 minutes ago, WLS said: Looking at purchasing a singer 29k62, I was going to download the user and service manuals but I get an error, are they no longer available ? ? All I have is this manual for the Singer 29k71, 72 and 73. I hope that helps you. 29k71-71-73 Service Manual and Parts List.pdf Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members WLS Posted September 29, 2020 Members Report Posted September 29, 2020 What would be a fair price for a 1949 Singer 29K62 long arm machine mounted on a table with servo motor and speed reducer ? Quote
Members shoepatcher Posted September 30, 2020 Members Report Posted September 30, 2020 $1,000.00 if it has been gone over!! glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.